View Single Post
Old 19th April 2010, 12:50   #4
EnEnGee
Posted a thing or two
 
CDT Tourer (SORN) & 2.0 V6 Saloon

Join Date: Nov 2006
Location: Sittingbourne
Posts: 1,058
Thanks: 2
Thanked 11 Times in 8 Posts
Default

As suggested by Crofts, I stuck mine on using No Nails in roll form, bought from the local DIY shop. I used this material to stick my CDT torpedo badges on many moons ago, and they are still there, so it must be fairly permanent.

I cut the material into 4 strips about 8-10mm wide (i.e the 19mm width cut down the middle) x 50-60mm long, and stuck it around the perimeter of the finisher. There is enough flexibility in these strips to follow the shape of the finisher, although the peel off backing comes adrift. I used brake cleaner to ensure the finisher and door concave were grease free.

After checking both cars this morning as I left for work, they are all still there and appear stuck fast.

Very pleased with the result.
EnEnGee is offline   Reply With Quote