Quote:
Originally Posted by Lennieonsax
Hi, I bought and fitted a cruise control kit, ECU, master switch and steering wheel loom. I found all the plugs and the job of fitting was quite easy, I was proud of my work. My problem is it doesn't work. Master switch lights up but I can't get any response from the switches. I did have a remap so wonder if that would have affected the codes but I welcome any ideas, please.
|
More than likely it's simply the switches on the clutch and brake pedal. They will want pushing down into contact position. Mine was the same.
__________________
Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual)
160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control.
BORN
Tuesday, 5th October 2004 @ 12:35:52
This vehicle was the 104,679th 75 to run off the production line, out of 112,381
This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744
This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s
|