The 75 and ZT Owners Club Forums - View Single Post - Anti roll bar won't go on (rear)

Blink · 8th November 2019, 14:04

Pic below - new arm and old arm side by side.

I didn't actually measure them (should have) but I think distances A and B are the same on the new arm as they are on the old arm. In other words, the droplink bolt hole has not moved to the left or the right. If it had done, the end of the roll bar would definitely fail to line up with the droplink.

8th November 2019, 14:04	#6
Blink Posted a thing or two Rover 75 Saloon Join Date: Apr 2019 Location: Under the car Posts: 1,840 Thanks: 210 Thanked 244 Times in 221 Posts	Position of droplink bolt hole on upper arm Pic below - new arm and old arm side by side. I didn't actually measure them (should have) but I think distances A and B are the same on the new arm as they are on the old arm. In other words, the droplink bolt hole has not moved to the left or the right. If it had done, the end of the roll bar would definitely fail to line up with the droplink.