Quote:
Originally Posted by SD1too
Directly underneath the pollen filter in the bottom of the plenum chamber is a large drain hole about 3 or 4 cms in diameter. Shouldn't this have a rubber sleeve inserted into it? There's nothing there on the car I'm repairing. I can see a double skin in the bodywork so currently rainwater will be going where it's not supposed to.
Quote:
This is for the pride-and-joy of an elderly gentleman which I'm repairing following various garage bodges!
If anyone can help, he and I would be very grateful.
Simon
|
|
HI Simon.
This is what you need, to fit it make sure you have applied some red rubber grease around the fixing points, at the same time trim 20mm off the end, then insert it from the top within the plenum, using your middle finger, once it is inserted get under the car to make sure the first fixing point as lipped over the outer skin
https://www.ebay.co.uk/itm/393511739...MAAOSw9plf-EMC
You could also ask anyone on the forum if they are breaking a R40 up or have one as a donna car