Quote:
Originally Posted by Arctic
I thought the heater/cooler, from the exhaust on an Auto as a drain screw on top as well, see photo's below.
Heater/cooler.
1
This also shows an hose fitted to the other part of the pipe work.
2
The same part can be seen with the manifold off.
3
As opposed to the manual exhaust pipes here below.
4
We are on about blanking it off at the back of this exhaust pipe, not removing the heater/cooler right?
|
Yep, leave it all in place and put a piece of 2mm thick aluminium between the egr pipe and the exhaust manifold.
Use the gasket as a template and no one will ever know!