Quote:
Originally Posted by Rich in Vancouver
A bit late for the OP but this may help others.
I just did mine yesterday to send to Rick.
I ran into the same issue with the outboard clip not wanting to release.
I solved the problem by using a long hook tool.
I tilted the cluster up to make a gap at the bottom, slipped the tool in and rotated it so the hook was behind the cluster, then gave a pull and the cluster popped right out.
Here's the tool. It is also useful for releasing a stuck bonnet on an MGF. 
 |
If only I had one of them, tho' mine was a very 'snug' fit 
__________________
Mods Fitted:
Cruise Control; FBH with GSM (was FrenchMike's Remote) & dash button; Rear Blind; In-line Thermostat; wired in front & rear cameras; Mercedes DRL +DRL2; twin horns, twin usb power outlets, digital coolant temperature readout, Real Walnut dash, Walnut & black leather steering wheel, Walnut Handbrake grip, Towbar with full Rover harness.
Rear seat cup holders.
Wanted: Walnut auto gear stick handle
Mods to do: all done  , need to come up with some more.
|