Apologies Pete, I forgot to put in my post in the other thread - to get the hub off the strut you've got to separate the hub from the lower ball joint.
Put a Jack under the brake disc and take up a bit of the slack, then put length of chain around the lower suspension arm once you've undone the pinch bolt, then you can pass a long bar underneath, put a bolt through the chain to hold the bar and use the underside of the car to brace the rear of the bar while you push the front of the bar down. There are quite a few meaty bits of suspension you can use down there!
One the hub is free you can leave it on the car, just resting on the lower arm. There is then enough play to get the strut out.
Unclip the three hoses/wires from the tabs on the strut before you do any of that...
Enjoy!
|