Quote:
Originally Posted by SkunkMunkey3000
You make that sound a whole lot less hassle that a lot of people are saying about awkward bolts and lots of time and effort to get them undone!
|
Yep, the only fidderly bit is undoing the two 10mm bolts that hold the anti role bar that is above the 18mm bolts, these bolts have a long thread so wind them up as high as you can without them coming out, this allows the roll bar to be lifted high enough to get the 18mm socket in. Doing it this way also means that you will not have a problem putting the 18mm bolts back in as the wishbone is moveable.