View Single Post
Old 15th May 2019, 19:27   #4
macafee2
This is my second home
 
Rover 75 Saloon & Tourer

Join Date: Sep 2012
Location: Lincoln
Posts: 14,890
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
Default

Quote:
Originally Posted by Comfortably Numb View Post
It will certainly fit either way around, so I don't think there is a specific top or bottom. I hope your vibration does not turn out to be what mine was, - clutch driven plate down to the rivets. I replaced my bottom mount (cracks in rubber) but it didn't improve it. One side of the clutch friction material was down to 1.5 mm, and was floating free as the rivet heads on that side were gone! And yet once you got moving, it would change gear fine, and accelerate normally with no vibration, only slipping a little in top gear if you pressed hard on the loud pedal!
thanks. clutch should be ok, all replaced last year. I'm a bit concerned it could be the DMF.

macafee2
macafee2 is offline   Reply With Quote