Secondly, the spare connectors at the front end.
The head unit is actually a v.4 (BMW I believe). The loom is fully connected to it
The cd changer is in the boot - my choice, with this system installed it is normally in the glovebox. This means the bracket for the navcom in the boot has been modified, but everything is in place. I peeled back the lead for the cd changer from the loom at the front, to reach the boot. All relevant connecters on the units are plugged in, but leave some spare at the front, around the steering column area:
Pic 7 - id from RAVE is the connection to the satnav l/s. I don't have this - do I need it? I have spare speakers in the shed that I could use though.
Pic 9 - id is C0818, which should connect the (new) ICE loom to the main car loom.(Presumably I unplug the old loom, then plug this one in?). However I cannot find the connector to unplug.
Pic 10 & Pic 11 - I can't id these.
Stewart
|