View Single Post
Old 16th April 2019, 11:40   #8
spencer burrows
Newbie
 
ROVER 75

Join Date: Apr 2018
Location: Whitchurch
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by planenut View Post
I should say, Welcome to the forum and the Club, let's hope that you find the solution here.

The first thing I would ask is are you overfilling the coolant? not intending to teach you to suck eggs as you obviously are more than capable with the work already carried out. That fill mark is very low down in the expansion tank. There is a mark on the outside of the tank, but I always find that harder to define.

Good luck.
when coldish i bleed the system by taking top off header tank and revving and observe speed of coolant. is this okay to do? i have to top up when it throws out the coolant. defo see coolant bubbling out of header cap only after higher revs. then i have to top up. i is not huge amounts and i am not over filling as the line is clear to see in the bottom of header tank.
spencer burrows is offline   Reply With Quote