The 75 and ZT Owners Club Forums - View Single Post

SD1too · 29th November 2021, 06:59

There's a torque specified for the cylinder block drain plug Billy: 20 Nm. The problem is that, due to the proximity of the exhaust manifold, there's very little room available for the head of the torque wrench. You won't be far off if you have to use an ordinary, standard length ring spanner.

Simon

29th November 2021, 06:59	#41
SD1too Doesn't do things by halves Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007 Location: Former Middlesex Posts: 20,394 Thanks: 1,587 Thanked 3,749 Times in 3,181 Posts	There's a torque specified for the cylinder block drain plug Billy: 20 Nm. The problem is that, due to the proximity of the exhaust manifold, there's very little room available for the head of the torque wrench. You won't be far off if you have to use an ordinary, standard length ring spanner. Simon __________________ "Whatever is rightly done, however humble, is noble." Sir Henry Royce.