Quote:
Originally Posted by BigRuss
Go into engine management then into the maintenance menu you'll find all the stepper adjustments there.
It's not automatic, you can only make the adjustment when the engine temperature reaches 88°C it tells you which way to turn the throttle stop adjustment screw (remove the black anti tamper cap first 
You're looking to get it to 23 steps or there abouts, it's a case of timing when you press the continue button when the two black lines are within limits.
Don't worry if you mis-time it just try again until it's correct
Make sure there's no additional load such as lights or Aircon whilst adjusting it as this will throw out the setting.
If you can't get it down to between 23-26 steps chances are there's lack of compression, usual suspect is the valves not being being lapped in when doing the head gasket
Russ |
Crikey, you lost me at the word "Go"!