Afternoon, thanks for the pictures. I’m after the fitting the connector plugs into (integral to the light unit). See my picture below. This plugs into lamp assembly, but there is a stand alone ‘socket’ with male PINs to fit.
I ‘might’ have tracked down a supplier. I believe they are made by TE Connectivity (AMP) and are the 070 series ‘quadlock’ (various PIN combinations male/female). But trying to work out which is which is not the easiest, I’ll email them and see what kind of response I get. Keep you posted!!
Last edited by Schotten; 29th December 2020 at 13:53..
Reason: Add image
|