[danbax]

Had this done by a garage paid 360 plus vat. They diagnosed head gasket failure was the problem with leaking oil.
The job they done never fixed the problem if anything appeared to be worse i think they threaded the bolts on the oil filter housing gasket.
The day i got the car back 2 miles later the onscreen diagnostic showed zero oil and to add 1ltr they looked at the car again jetwashed the engine probably tightended a few bolts in hoping to fix the problem
This onscreen display message continued every 600 miles or so to add 1ltr until i fixed the solenoid seals & oil filter housing gasket leaks i repaired these later, oil consumption went down 8/900 miles per ltr of oil which seem to be leaking again.... when doing the seals on the oil filter housing gasket the 3 fixings that held it to thw block wouldnt torque ul to specs. I drilled them and studded through one side which seemed to fix the leak from there.
Oil consumption seemed to be going in a downward trend 400 mile ltr
10k miles later and after covid i went back again asked the garage ad to why my car was leaking again after theyre fix??
The mechanic states it needs the same job done again and an additional oil return pipe at the back of the block needs replaced as its probably blocked? Common issue apparently. Another 600 pounds please he states lol
I get the car back after them having it for a day and now miraculously ive just done 2200 miles per ltr of oil (common consumption for this engine apparently).
But its still leaking as every so often when the engines warming up or a little harsh braking or cornering oil is dripping onto exhaust.
Anyone wanna know the garage its on Great lime road Newcastle accross from the chippy.

I probably had consumer rights in regards to this.....
Anyway im thinking of just doing the head myself anyone had experience of these?

Shame i just wamt rid of it now sick of it....