The 75 and ZT Owners Club Forums - View Single Post - Spring isolators

Blink · 27th October 2019, 08:40

PS. The only other conceivable option (I think Brian mentioned it) is to cut the rim off the isolators so they'll sit flat on the floor of the Indian arm cups. Actually doing this however will be much harder than it sounds. They're made from extremely tough rubber and the cut line is circular.

The line would be through an arc roughly where the bottom edge of the part number is here (RKB101290).

These things are NLA so there'd only be one chance to get it right.

27th October 2019, 08:40	#17
Blink Posted a thing or two Rover 75 Saloon Join Date: Apr 2019 Location: Under the car Posts: 1,840 Thanks: 210 Thanked 244 Times in 221 Posts	PS. The only other conceivable option (I think Brian mentioned it) is to cut the rim off the isolators so they'll sit flat on the floor of the Indian arm cups. Actually doing this however will be much harder than it sounds. They're made from extremely tough rubber and the cut line is circular. The line would be through an arc roughly where the bottom edge of the part number is here (RKB101290). These things are NLA so there'd only be one chance to get it right. Last edited by Blink; 27th October 2019 at 08:56..