Quote:
Originally Posted by stocktake
Sorry, missed this
Had a few where the torx will not move, when everything is undone you can pull upwards on the front panel and the brackets the torx bolts hold on will pull up and over the rubber bung and off it comes. To refit you trim the upper overhang on the rubber add a little grease and the brackets will push back over the rubber bushes. As the front panel is held on in many other places the rubber bushes are sandwiched in place and still do their job
|
Thanks Dave, but Steve beat you too it
. The OP's idea of locknuts from underneath once removed seems quite clever too.
Keep well