The 75 and ZT Owners Club Forums - View Single Post

RN3212 · 25th September 2011, 19:13

Turn the steering fully towards the side you need to change the bulb on.You'll see an inspection hatch in the Wheel Arch Liner.Turn the clip on the bottom and push the panel upwards to remove it.It's fairly confined in there.Take off the rubber cover and release the Spring Clip holding in the bulb.When inserting the new bulb make sure it's lined up correctly.There's a raised spot on the metal base of the bulb and this fits into a cut-out in the Headlight casing.

25th September 2011, 19:13	#3
RN3212 Gets stuck in Rover 75 Classic SE 2.0V6 Auto Moonstone Green Join Date: Sep 2008 Location: Roscommon Posts: 839 Thanks: 315 Thanked 46 Times in 34 Posts	Turn the steering fully towards the side you need to change the bulb on.You'll see an inspection hatch in the Wheel Arch Liner.Turn the clip on the bottom and push the panel upwards to remove it.It's fairly confined in there.Take off the rubber cover and release the Spring Clip holding in the bulb.When inserting the new bulb make sure it's lined up correctly.There's a raised spot on the metal base of the bulb and this fits into a cut-out in the Headlight casing. __________________ [SIGPIC][/SIGPIC]