What I did with my Rover 75/MG ZT today? - Page 1446

trikey · 12th June 2024, 11:01

Quote:

Originally Posted by Raven Black

1.8?l Thought was v8,

I have a 1.8 as well Jennie.

Sent from my SM-G780G using Tapatalk

Brunty · 12th June 2024, 18:09

Took Starlight in for welding this morning, 3 areas on front offside sill, they also noticed corrosion around outer sill by front jacking point so cut out a section and welded in new metal, jacking point solid. All done, seam sealer, paint, stone chip, then drilled 3 holes and injected 2 litres lanoguard with 120 psi lance, rubber grommets put in to seal. Fantastic job and only charged £279.00.
Labour rate £40.00 an hour, previous body shop that I used for rear sills and jacking points did a great job but charged £80.00 an hour. Hopefully nothing else needs doing for a while.

12th June 2024, 18:09	#14452
Brunty Loves to post Rover 75 Saloon Join Date: Mar 2017 Location: Newtown Posts: 420 Thanks: 273 Thanked 95 Times in 65 Posts	Took Starlight in for welding this morning, 3 areas on front offside sill, they also noticed corrosion around outer sill by front jacking point so cut out a section and welded in new metal, jacking point solid. All done, seam sealer, paint, stone chip, then drilled 3 holes and injected 2 litres lanoguard with 120 psi lance, rubber grommets put in to seal. Fantastic job and only charged £279.00. Labour rate £40.00 an hour, previous body shop that I used for rear sills and jacking points did a great job but charged £80.00 an hour. Hopefully nothing else needs doing for a while.