Removal of Iovox CD80

[tdm34]

Hi guys, is there any particular way to remove the Iovox CD80 Head Unit?

I'm over the moon with my new Connie, but the standard audio system is
very poor, so i'm upgading to a single DIN head unit with BT/iPod/DAB built in

And then i'll replace the speaker arrays starting with the fronts

Regards Rob...

[trebor]

Originally Posted by tdm34

Hi guys, is there any particular way to remove the Iovox CD80 Head Unit?

I'm over the moon with my new Connie, but the standard audio system is
very poor, so i'm upgading to a single DIN head unit with BT/iPod/DAB built in

And then i'll replace the speaker arrays starting with the fronts

Regards Rob...

If its the type that needs the clips inside unit pushing out to release from the facia then you can use strips of an old credit card if you dont have the correct tool to take it out of the facia

Its easy peasy to take the unit out together with the facia by removing the black plastic trim under the eyebrow ( if you are not aware the eyebrow is the piece that sits right on top of the facia, look underneath it and you will see the plastic trim ) with a flat screwdriver which will reveal 2 screws, take them out and pull out the eyebrow to reveal 2 more screws in the top left and right corners, remove them and the whole lot will slide out.