Part number for this single DIN fascia adapter?

Rob Bell · 3rd September 2007, 13:52

Having just seen Christopher's rather splendid ICE installation, just wondering whether anyone knows the part number for this fascia adapter?

Looks ideal for adapting into a double DIN - if anyone has the details, I'll be ordering it very shortly!!! LOL

Thanks

SMC Trading · 3rd September 2007, 14:31

We have just taken this one from a 75 if it's any good?

CDTi · 3rd September 2007, 19:27

Quote:

Originally Posted by Rob Bell

just wondering whether anyone knows the part number for this fascia adapter?

This is the Iovox adaptor, I believe. IIRC several people said they were in short supply some time back.

I got the attached pdf from Rimmers some time back and it may be of help.

Michal · 3rd September 2007, 21:32

The curvier version FJV000480PUY is neither available from xpart nor rimmer brothers. The Iovox (FJV000670PUY) is, but last week I paid 51 quid for it with shipping from RB. Nothing like 9 quid in the previous post. It's the most expensive piece of plastic in my life

Jontie · 3rd September 2007, 22:14

http://www.dvbcaraudio.co.uk/rover-f...ry-p-1817.html

nisfo · 3rd September 2007, 22:19

I got mine off fleabay, matching rubber mat in the slot above.

The same as this one.........
http://cgi.ebay.co.uk/ROVER-75-CAR-S...QQcmdZViewItem

Dont use it anymore as I like my Alpine unit, would trade if I can get a part I need.....

Sorry found this too......**DROOLS**
http://cgi.ebay.co.uk/MG-ZT-ROVER-75...QQcmdZViewItem

Rob Bell · 4th September 2007, 11:09

Quote:

Originally Posted by SMC Trading

We have just taken this one from a 75 if it's any good?

Close, thanks - but ideally I'm after the one that Christopher has (the Iovox one - thanks CDTi for identifying it for and the pdf file) - as I want the unit centred in the fascia rather than to one side.

I guess that unit could be modified, but if I can find an Iovox one, then the amount of modification should be halved

Nisfo - that's the ICE bezel currently in my ZT. Nicely made, attractive shape. Shame about the standard fit Kenwood...

CDTi · 4th September 2007, 11:43

Rob

Have you looked at item 3 on this page?

http://www.bluespot.co.uk/install/show_model.asp?id=225

Could this be adapted for double din?

Starman · 4th September 2007, 12:01

Hi Rob

I got mine from Ray at Premier auto parts,Romford, Essex....
Tel. 01708 776915/753111.

They are an X-part stockist and carry these in stock.

True they are expensive (55.91 squid,but delivered in two days):lol:

Comes with rubber mat for trinket tray too,,,,

Part no. FJV000670PUY

I've got my alpine sitting in it nicely.
Lastly..I used an autoleads harness PC99-X32 and alpine remote adapter PC99-ALP. Both pleased to say work very well..

Hope thats of help.

Dronix · 4th September 2007, 13:13

I got mine exactly like on 1st post picture for about $20 from local Moscow part shop.
They had only one and it looked like they didn't know what to do with it, 'coz here are not much rovers at all.

3rd September 2007, 13:52	#1
Rob Bell Gets stuck in ZT-T CDTi + Join Date: Nov 2006 Location: London Posts: 561 Thanks: 7 Thanked 10 Times in 7 Posts	Part number for this single DIN fascia adapter? Having just seen Christopher's rather splendid ICE installation, just wondering whether anyone knows the part number for this fascia adapter? Looks ideal for adapting into a double DIN - if anyone has the details, I'll be ordering it very shortly!!! LOL Thanks

3rd September 2007, 22:14	#5
Jontie Loves to post Rover75 2.0L Conn SE Auto Join Date: Nov 2006 Location: Barrowford near NELSON in Lancashire Posts: 456 Thanks: 15 Thanked 3 Times in 3 Posts	Is this any good to you????? http://www.dvbcaraudio.co.uk/rover-f...ry-p-1817.html __________________ [SIGPIC][/SIGPIC]John. (Sadly,they really don't make 'em like this anymore!!!!)

3rd September 2007, 22:19	#6
nisfo Gets stuck in 75 Join Date: Jun 2007 Location: - Posts: 868 Thanks: 0 Thanked 2 Times in 2 Posts	I got mine off fleabay, matching rubber mat in the slot above. The same as this one......... http://cgi.ebay.co.uk/ROVER-75-CAR-S...QQcmdZViewItem Dont use it anymore as I like my Alpine unit, would trade if I can get a part I need..... Sorry found this too......DROOLS http://cgi.ebay.co.uk/MG-ZT-ROVER-75...QQcmdZViewItem Last edited by nisfo; 3rd September 2007 at 22:22..

4th September 2007, 11:43	#8
CDTi This is my second home No longer in the MGR club Join Date: Nov 2006 Location: Tipperary Posts: 3,933 Thanks: 35 Thanked 51 Times in 35 Posts	Rob Have you looked at item 3 on this page? http://www.bluespot.co.uk/install/show_model.asp?id=225 Could this be adapted for double din? __________________ 'Tis better to be silent and be thought a fool, than to speak and remove all doubt.

4th September 2007, 12:01	#9
Starman Posted a thing or two 03 CDTi Tourer Conn SE auto Join Date: Jul 2007 Location: Shrewsbury Posts: 1,405 Thanks: 0 Thanked 15 Times in 4 Posts	Hi Rob I got mine from Ray at Premier auto parts,Romford, Essex.... Tel. 01708 776915/753111. They are an X-part stockist and carry these in stock. True they are expensive (55.91 squid,but delivered in two days):lol: Comes with rubber mat for trinket tray too,,,, Part no. FJV000670PUY I've got my alpine sitting in it nicely. Lastly..I used an autoleads harness PC99-X32 and alpine remote adapter PC99-ALP. Both pleased to say work very well.. Hope thats of help. __________________ [SIGPIC][/SIGPIC]

3rd September 2007, 14:31	#2
SMC Trading I really should get out more....... Rover 75 Join Date: Nov 2006 Location: Nr Harlow Posts: 2,872 Thanks: 1 Thanked 6 Times in 5 Posts	We have just taken this one from a 75 if it's any good?

3rd September 2007, 21:32	#4
Michal Regular poster Jaguar S-Type R Join Date: Aug 2007 Location: Cardiff Posts: 73 Thanks: 0 Thanked 0 Times in 0 Posts	The curvier version FJV000480PUY is neither available from xpart nor rimmer brothers. The Iovox (FJV000670PUY) is, but last week I paid 51 quid for it with shipping from RB. Nothing like 9 quid in the previous post. It's the most expensive piece of plastic in my life

4th September 2007, 13:13	#10
Dronix Regular poster Rover 75 Join Date: Jul 2007 Location: Moscow Posts: 35 Thanks: 0 Thanked 0 Times in 0 Posts	I got mine exactly like on 1st post picture for about $20 from local Moscow part shop. They had only one and it looked like they didn't know what to do with it, 'coz here are not much rovers at all.