|
||
|
||
|
|
![]() |
#1 |
This is my second home
Rover 75 V8 Join Date: Oct 2006
Posts: 3,448
Thanks: 0
Thanked 206 Times in 32 Posts
|
![]() Long story shortened
1. Family PC stops working big style 2. eventually F Disc and reinstal everything inc SP" etc. 3. Get working again 4. strange behaviour - on start up just before the welcome screen appears screen turns off and turns on again ![]() 5 stranger behaviour if machine is left for a while screen turns off, then reverts to log on screen. When you go back it reloads desktop and then comes up with error message! Pic 1 shows error message. Pic 2 shows further details message Graphics card is RAdeon. UI downloaded and installed all the latest drivers. Machine works OK except for above behaviours. Would welcome any advice at all ![]() ![]() ![]() tvm Mike ![]()
__________________
Mike [SIGPIC][/SIGPIC] |
![]() |
![]() |
![]() |
#2 |
This is my second home
MG6 TL Join Date: Nov 2006
Location: Tarn
Posts: 5,269
Thanks: 2
Thanked 46 Times in 37 Posts
|
![]() Have you been working on the innards of the PC recently?
Anyway - this is about the only thing I can find. Look for a posting on : Jul 15, 2005, 09:39 AM http://hardwareanalysis.com/content/topic/46144/ Failing that Mike, you could always email MS. I did recently and was very pleasently surprised at the speedy and helpful reply! |
![]() |
![]() |
![]() |
#3 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
![]() what do you have in the event logs?
|
![]() |
![]() |
![]() |
#4 |
This is my second home
Rover 75 V8 Join Date: Oct 2006
Posts: 3,448
Thanks: 0
Thanked 206 Times in 32 Posts
|
![]() Keith,
How do I find the events log? Tatts, yes I have installed a new wireless pci (?) card tvm Mike
__________________
Mike [SIGPIC][/SIGPIC] |
![]() |
![]() |
![]() |
#5 |
Posted a thing or two
2004 1.8 Connoisseur SE, 1999 XJ8 Join Date: Nov 2006
Location: Northern Ireland
Posts: 1,163
Thanks: 0
Thanked 1 Time in 1 Post
|
![]() This lot are a friendly bunch
http://www.techspot.com/vb/ they can usually sort most BCode problems... me, I just start replacing bits until the problem goes away ![]()
__________________
[SIGPIC][/SIGPIC] |
![]() |
![]() |
![]() |
#6 |
This is my second home
MG6 TL Join Date: Nov 2006
Location: Tarn
Posts: 5,269
Thanks: 2
Thanked 46 Times in 37 Posts
|
![]() Mike, do you get the error if you remove the PCI card?
If not, try it in a different slot, and make sure the drivers are up to date too. |
![]() |
![]() |
![]() |
|
|