ZT Interior **GONE**

Yella Fella · 23rd July 2012, 20:38

Comes from a 2004 ZT with 40K on the ****.

The drivers seat has suffered the usual problem

See below.

The passenger seat is mint. See below.

Rears seats. Totally free from tears/holes etc. Mint condition.

Close up of the material.

I think there may be a fault in the driver seat air bag (or in the wiring under the seat) and the locking/unlocking mechanism doesn't work on the rear seat when folding down so free to anyone who has a use for this interior.

Im in Glasgow.

YF

RichB · 24th July 2012, 10:40

Hi Yellow Fella,

I'm no where near you so coming for the seats is not an option for me. But if you get no takers and decide to take the seats to the tip, would you consider butchering one of the seats to get the foam out of one of the backs? The foam in the bolster of my drivers seat has a hole in it so want to do a replacement at some point.

Cheers,
Rich

Bigcul1 · 24th July 2012, 13:09

can I have the covers if your gonna scrap them? I can use them for templates when I make some new ones up and re trim my seats. If this is viable please let me know. Thanks

Yella Fella · 25th July 2012, 16:16

Quote:

Originally Posted by RichB

Hi Yellow Fella,

I'm no where near you so coming for the seats is not an option for me. But if you get no takers and decide to take the seats to the tip, would you consider butchering one of the seats to get the foam out of one of the backs? The foam in the bolster of my drivers seat has a hole in it so want to do a replacement at some point.

Cheers,
Rich

Quote:

Originally Posted by Bigcul1

can I have the covers if your gonna scrap them? I can use them for templates when I make some new ones up and re trim my seats. If this is viable please let me know. Thanks

Hi, I can do both of the above if there are no takers. I dont known when I can get them
stripped though! I was hoping to get rid of them easily or to the tip. So it could be a while before i get around to stripping them.

barrienixon · 25th July 2012, 18:56

Hi,

Do these have the seat back pockets if so would I be able to have the pockets?

p.s. as you are in glasgow I could collect

Barrie.

Yella Fella · 25th July 2012, 19:52

Quote:

Originally Posted by barrienixon

Hi,

Do these have the seat back pockets if so would I be able to have the pockets?

p.s. as you are in glasgow I could collect

Barrie.

Not, they are MKII seats so vinyl only at the back, no pockets. I think the pockets are on the MKI Monaco seats.

Bigcul1 · 25th July 2012, 20:58

Quote:

Originally Posted by Yella Fella

Hi, I can do both of the above if there are no takers. I dont known when I can get them
stripped though! I was hoping to get rid of them easily or to the tip. So it could be a while before i get around to stripping them.

Hi thanks for response, happy to wait not in a rush.

Yella Fella · 12th August 2012, 19:57

Quote:

Originally Posted by RichB

Hi Yellow Fella,

I'm no where near you so coming for the seats is not an option for me. But if you get no takers and decide to take the seats to the tip, would you consider butchering one of the seats to get the foam out of one of the backs? The foam in the bolster of my drivers seat has a hole in it so want to do a replacement at some point.

Cheers,
Rich

Quote:

Originally Posted by Bigcul1

can I have the covers if your gonna scrap them? I can use them for templates when I make some new ones up and re trim my seats. If this is viable please let me know. Thanks

Both wrapped and ready for posting tomorrow.

23rd July 2012, 20:38	#1
Yella Fella Nemo Me Impune Lacessit None at the moment Join Date: Nov 2007 Location: Glasgow's HMP Barlinnie, 'A' Hall, 2nd Flat Posts: 5,192 Thanks: 493 Thanked 1,094 Times in 666 Posts	ZT Interior GONE Comes from a 2004 ZT with 40K on the **. The drivers seat has suffered the usual problem See below. The passenger seat is mint. See below. Rears seats. Totally free from tears/holes etc. Mint condition. Close up of the material. I think there may be a fault in the driver seat air bag (or in the wiring under the seat) and the locking/unlocking mechanism doesn't work on the rear seat when folding down so free** to anyone who has a use for this interior. Im in Glasgow. YF __________________ [SIGPIC][/SIGPIC]

24th July 2012, 10:40	#2
RichB Gets stuck in ZT260 SE, ZT-T+ CDTi Join Date: Aug 2009 Location: Staffs Posts: 583 Thanks: 13 Thanked 16 Times in 13 Posts	Hi Yellow Fella, I'm no where near you so coming for the seats is not an option for me. But if you get no takers and decide to take the seats to the tip, would you consider butchering one of the seats to get the foam out of one of the backs? The foam in the bolster of my drivers seat has a hole in it so want to do a replacement at some point. Cheers, Rich __________________ 53 MG ZT 260 SE Monogram Garnet Red #073 61 Seat Exeo ST TDI Daily Driver 99 Mazda MX-5 Turbo tracktoy

24th July 2012, 13:09	#3
Bigcul1 Gets stuck in Rover 75 CDTi Con SE Join Date: Jul 2011 Location: Northallerton Posts: 846 Thanks: 123 Thanked 131 Times in 91 Posts	can I have the covers if your gonna scrap them? I can use them for templates when I make some new ones up and re trim my seats. If this is viable please let me know. Thanks

25th July 2012, 18:56	#5
barrienixon Avid contributor ZT CDTi + 114 Blue Join Date: Aug 2009 Location: Balloch Posts: 206 Thanks: 0 Thanked 1 Time in 1 Post	Hi, Do these have the seat back pockets if so would I be able to have the pockets? p.s. as you are in glasgow I could collect Barrie.