Lady Emma in her new home - Page 2

coolcat · 9th February 2024, 17:39

Starting to get Lady Emma cleaned. Some three hours of jet washing the heavy soiling off and using some TFR (Traffic film remover) on the caked on bird poop etc. She is beginning to look more respectable.

I will be doing some snow foam next but will wait till she is out the water before compound polishing the hull. At that point we will be replacing the anodes, new antifoul and replace the packing glands on the shafts.

I would like to renew the tired canopy and have new pin stripes and decals. That will have to wait till the end of this season when I have saved a few more pennies up

Lady Emma by Jeff Cranwell, on Flickr

coolcat · 31st March 2024, 12:45

Easter at the Marina

Titchmarsh Marina by Jeff Cranwell, on Flickr

Lady Emma by Jeff Cranwell, on Flickr

coolcat · 26th May 2024, 08:41

Lady Emma is now in her summer berth at Titchmarsh Marina...

Lady Emma by Jeff Cranwell, on Flickr

The view out of the bedroom porthole at sunset...

Sunset at Titchmarsh Marina by Jeff Cranwell, on Flickr

Sunset from the helm...

Lady Emma by Jeff Cranwell, on Flickr

coolcat · 26th May 2024, 08:47

Lady Emma is coming out of the water on the 7th of June.

She will be on the hard for a few weeks whilst we give her bottom a scrub, a new coat of anti foul paint, replace the anodes, new shaft seals and a compound polish.

Any other below the water line jobs that need doing can also be dealt with.

If all goes to plan we shall re launch her before the end of the month.

9th February 2024, 17:39	#11
coolcat This is my second home Audi Q3 TDI S-Line Quattro Join Date: Jul 2007 Location: Clacton On Sea/On the boat somewhere Posts: 51,237 Thanks: 9,890 Thanked 12,235 Times in 8,232 Posts	Starting to get Lady Emma cleaned. Some three hours of jet washing the heavy soiling off and using some TFR (Traffic film remover) on the caked on bird poop etc. She is beginning to look more respectable. I will be doing some snow foam next but will wait till she is out the water before compound polishing the hull. At that point we will be replacing the anodes, new antifoul and replace the packing glands on the shafts. I would like to renew the tired canopy and have new pin stripes and decals. That will have to wait till the end of this season when I have saved a few more pennies up Lady Emma by Jeff Cranwell, on Flickr Lady Emma by Jeff Cranwell, on Flickr Lady Emma by Jeff Cranwell, on Flickr Lady Emma by Jeff Cranwell, on Flickr __________________ Jeff.

31st March 2024, 12:45	#12
coolcat This is my second home Audi Q3 TDI S-Line Quattro Join Date: Jul 2007 Location: Clacton On Sea/On the boat somewhere Posts: 51,237 Thanks: 9,890 Thanked 12,235 Times in 8,232 Posts	Easter at the Marina Titchmarsh Marina by Jeff Cranwell, on Flickr Lady Emma by Jeff Cranwell, on Flickr Lady Emma by Jeff Cranwell, on Flickr __________________ Jeff. Last edited by coolcat; 31st March 2024 at 20:40..

26th May 2024, 08:41	#13
coolcat This is my second home Audi Q3 TDI S-Line Quattro Join Date: Jul 2007 Location: Clacton On Sea/On the boat somewhere Posts: 51,237 Thanks: 9,890 Thanked 12,235 Times in 8,232 Posts	Lady Emma is now in her summer berth at Titchmarsh Marina... Lady Emma by Jeff Cranwell, on Flickr The view out of the bedroom porthole at sunset... Sunset at Titchmarsh Marina by Jeff Cranwell, on Flickr Sunset from the helm... Lady Emma by Jeff Cranwell, on Flickr __________________ Jeff.

26th May 2024, 08:47	#14
coolcat This is my second home Audi Q3 TDI S-Line Quattro Join Date: Jul 2007 Location: Clacton On Sea/On the boat somewhere Posts: 51,237 Thanks: 9,890 Thanked 12,235 Times in 8,232 Posts	Lady Emma is coming out of the water on the 7th of June. She will be on the hard for a few weeks whilst we give her bottom a scrub, a new coat of anti foul paint, replace the anodes, new shaft seals and a compound polish. Any other below the water line jobs that need doing can also be dealt with. If all goes to plan we shall re launch her before the end of the month. __________________ Jeff.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode