|
||
|
1st June 2010, 01:08 | #491 | |
Banned
None Join Date: Feb 2010
Location: Here on the Forum
Posts: 5,352
Thanks: 632
Thanked 822 Times in 573 Posts
|
Quote:
Hi John , Manual was sent, The Install is pretty simple ! |
|
1st June 2010, 01:10 | #492 |
Banned
None Join Date: Feb 2010
Location: Here on the Forum
Posts: 5,352
Thanks: 632
Thanked 822 Times in 573 Posts
|
|
1st June 2010, 04:27 | #493 |
Regular poster
Rover 75 Join Date: May 2010
Location: Cluj
Posts: 64
Thanks: 0
Thanked 0 Times in 0 Posts
|
picky..... thanks for testing ,
EDIT : i told you it will not work. Last edited by petrutms; 3rd June 2010 at 21:37.. |
1st June 2010, 06:35 | #494 | |
I really should get out more.......
BMW I3 Join Date: Nov 2006
Location: South East London
Posts: 2,224
Thanks: 31
Thanked 77 Times in 61 Posts
|
Quote:
Now petrutms has given you the link to D/L WINCE English, please could you publish your results when you have tested it. Ref GPS MOD, I have checked the control panel, and can not see anything to do with enabling the COM pot?
__________________
Regards Tony Membership No 135 |
|
1st June 2010, 06:39 | #495 |
Regular poster
Rover 75 Join Date: May 2010
Location: Cluj
Posts: 64
Thanks: 0
Thanked 0 Times in 0 Posts
|
tony, what you want to enable? TMC ? If device manager doesnt show the tmc port, you dont have the hardware, the factory sent device without tmc, is not the first time, all chinese to that very often...
If someone have tmc port but igo doesnt see it, that is a job for me... And if you add usb tmc, in theory the device will automatically create a new com port for it ( it happens with my 3g modem when installed correctly). |
1st June 2010, 06:44 | #496 | |
I really should get out more.......
BMW I3 Join Date: Nov 2006
Location: South East London
Posts: 2,224
Thanks: 31
Thanked 77 Times in 61 Posts
|
Quote:
I tried to add a COM port by using a spare USB lead I had, I connected wires to 9, 10,11,12 on the GPS board, but the unit does not see the port in device manager, Picky767 suggest I check on control panel, but I can not find any where to add COM port, If I can get this port working, I can try USB receiver that I have ordered from a supplier in China, but it will take upto 10 days for unit to come. If you can enable TMC on the GPS board it would be great
__________________
Regards Tony Membership No 135 Last edited by tony_fry; 1st June 2010 at 06:52.. |
|
1st June 2010, 07:45 | #497 | |
Gets stuck in
ZT260 SE, ZT-T+ CDTi Join Date: Aug 2009
Location: Staffs
Posts: 583
Thanks: 13
Thanked 16 Times in 13 Posts
|
Quote:
I'm just thinking about moving it to another car in the future. Although they look fantastic and OEM in the 75/ZT, I'd like the flexibility of being able to fit it to another car in the future should I ever sell my ZT. Rich
__________________
53 MG ZT 260 SE Monogram Garnet Red #073 61 Seat Exeo ST TDI Daily Driver 99 Mazda MX-5 Turbo tracktoy |
|
1st June 2010, 08:25 | #498 |
Regular poster
Rover 75 Join Date: May 2010
Location: Cluj
Posts: 64
Thanks: 0
Thanked 0 Times in 0 Posts
|
the built in usb port ( the one that you soldered ) already have com port assigned ( usb com 5 i think ) . Another will appear if you attach and install correctly another device.
|
1st June 2010, 09:32 | #499 | |
I really should get out more.......
BMW I3 Join Date: Nov 2006
Location: South East London
Posts: 2,224
Thanks: 31
Thanked 77 Times in 61 Posts
|
Quote:
MMM I only have COM 2 and COM 5 which is what I had before I installed GPS Mod, I will have to check the wires on pins 9-12. Would I need to connect a memory stock or similar device, before the device manager wees the COM port?
__________________
Regards Tony Membership No 135 |
|
1st June 2010, 09:48 | #500 |
Regular poster
Rover 75 Join Date: May 2010
Location: Cluj
Posts: 64
Thanks: 0
Thanked 0 Times in 0 Posts
|
you dont understand . IT IS PERFECT to have only com 2 and 5, you`ll never have another unless you connect TO USB PORT correctly a tmc device, 3g modem, wifi dongle, etc. Try a usb flashdrive, if it appears in total commander as usbhd, all ok.
|
Thread Tools | |
Display Modes | |
|
|