[B]Lead From Symphony to CD Player[/B]

dad1uk · 8th December 2015, 12:14

I have fitted the Symphony in, after a few alterations to get the wheel controls working and to stop it flashing CALL/MUTE, it is working perfectly.
I have the correct CD player (info given by Forum Member) but need the lead between the two. I believe one end has a Blue mini ISO and the other has a rectangular plug on it.

Firstly is it part of the loom or separate?

If separate then......
Has any one got one they no longer require and want to sell?
Has a breaker got a car with one than I can have?

If part of the loom.....
Has anyone got the plugs?
Has anyone got the wiring for it so I can make up my own lead?

Any help greatfully received.

dad1uk · 8th December 2015, 12:16

Sorry, hit the button twice and it duplicated.....

Duotone · 8th December 2015, 12:41

You are correct about the changer lead.

Blue mini ISO plug and a 10 pin BMW plug at the other.

The lead is usually separate when connected to a Symphony.

As to where you could get one.

Put an ad in the wanted section or try a scrapyard.

The blue min ISO plug is readily available and the cable can be obtained from such as
Wilco motorsave as towbar electrics wiring.

Blue plug and pins from here.

https://www.google.co.uk/aclk?sa=l&a...w.nexxia.co.uk

The changer plug from here

http://www.ebay.co.uk/itm/80330-Kit-...item2ee923ae20

Dave T

dad1uk · 10th December 2015, 11:58

I can get the plugs and wire should not be a problem, can anyone advise of the wiring in the plugs?
Has anyone got one and can do a wiring diagram?
All help accepted

8th December 2015, 12:14	#1
dad1uk Loves to post No Rover at the moment = Vauxhall Join Date: Oct 2015 Location: Birmingham Posts: 278 Thanks: 99 Thanked 75 Times in 55 Posts	[B]Lead From Symphony to CD Player[/B] I have fitted the Symphony in, after a few alterations to get the wheel controls working and to stop it flashing CALL/MUTE, it is working perfectly. I have the correct CD player (info given by Forum Member) but need the lead between the two. I believe one end has a Blue mini ISO and the other has a rectangular plug on it. Firstly is it part of the loom or separate? If separate then...... Has any one got one they no longer require and want to sell? Has a breaker got a car with one than I can have? If part of the loom..... Has anyone got the plugs? Has anyone got the wiring for it so I can make up my own lead? Any help greatfully received. __________________ Simon.

8th December 2015, 12:16	#2
dad1uk Loves to post No Rover at the moment = Vauxhall Join Date: Oct 2015 Location: Birmingham Posts: 278 Thanks: 99 Thanked 75 Times in 55 Posts	Sorry, hit the button twice and it duplicated..... __________________ Simon.

8th December 2015, 12:41	#3
Duotone This is my second home 75 Join Date: Nov 2006 Location: Leeds Posts: 8,432 Thanks: 176 Thanked 907 Times in 716 Posts	You are correct about the changer lead. Blue mini ISO plug and a 10 pin BMW plug at the other. The lead is usually separate when connected to a Symphony. As to where you could get one. Put an ad in the wanted section or try a scrapyard. The blue min ISO plug is readily available and the cable can be obtained from such as Wilco motorsave as towbar electrics wiring. Blue plug and pins from here. https://www.google.co.uk/aclk?sa=l&a...w.nexxia.co.uk The changer plug from here http://www.ebay.co.uk/itm/80330-Kit-...item2ee923ae20 Dave T Last edited by Duotone; 10th December 2015 at 07:17..

10th December 2015, 11:58	#4
dad1uk Loves to post No Rover at the moment = Vauxhall Join Date: Oct 2015 Location: Birmingham Posts: 278 Thanks: 99 Thanked 75 Times in 55 Posts	I can get the plugs and wire should not be a problem, can anyone advise of the wiring in the plugs? Has anyone got one and can do a wiring diagram? All help accepted __________________ Simon.