|
||
|
5th March 2019, 19:58 | #1 |
Regular poster
Rover 75 Saloon Join Date: Dec 2018
Location: Reading
Posts: 43
Thanks: 22
Thanked 2 Times in 2 Posts
|
2003 1.8T - intermittent misfire on starting
It doesn't do it every time I start it, but when it does it can go on for anything from 15 seconds to a minute before it clears and then runs fine for any amount of time until I switch off.
Sounds and feels like one cylinder in particular is missing as it has a regular 'beat'. I put new plugs in, but that made no difference. I'm guessing it must be either a dodgy plug lead or one of the coil packs, but I don't want to just randomly change things out in the hope of curing it. Any ideas people? Thanks. PS - when I changed the plugs the plastic tops of the plug lead covers just cracked and fell apart when I pulled on them - had to pull the remaining rubber part out with a pair of pliers! Other than that an easy job. |
5th March 2019, 19:59 | #2 |
This is my second home
rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009
Location: Seaton Carew
Posts: 26,920
Thanks: 65
Thanked 7,142 Times in 4,642 Posts
|
Symptoms of a failing inlet manifold gasket
|
5th March 2019, 20:02 | #3 |
This is my second home
ZT260 #243 (resting) Join Date: May 2010
Location: Prestonpans
Posts: 22,479
Thanks: 650
Thanked 4,624 Times in 3,358 Posts
|
Check your coolant level in the header tank. 1.8 and 1.8T are prone to a weeping inlet manifold gasket, when the engine is cooling down/cold it allows a dribble of coolant into the inlet manifold which manifests itself with a rough idle on starting. Idle settles down once the coolant has burnt off.
|
5th March 2019, 20:54 | #4 |
Trader
Rover 75 Tourer Join Date: Apr 2011
Location: Portsmouth
Posts: 849
Thanks: 201
Thanked 292 Times in 200 Posts
|
I did get asked to look at a car with a similar symptom, and after checking through all the obvious things, I ended up finding that the valve timing was 1 tooth out on the inlet cam. Not entirely sure how the rough running ever cleared itself.
But, check for leaking gaskets first.
__________________
Now offering T4 services in the Fareham area Replacement keys programmed / supplied / cut Diesel 135 upgrade available IPK virginisation and T4 matching available Sorry, due to a big change in home circumstances, I am unable to do any large jobs at present, but can still offer evening time diagnostics. |
5th March 2019, 22:58 | #5 |
Regular poster
Rover 75 Saloon Join Date: Dec 2018
Location: Reading
Posts: 43
Thanks: 22
Thanked 2 Times in 2 Posts
|
Thanks guys. But surely that would cause general rough running, and not one particular cylinder to misfire, as I'm sure is the case in this instance as I can hear and feel that only one plug is misfiring?
|
5th March 2019, 23:31 | #6 |
This is my second home
ZT260 #243 (resting) Join Date: May 2010
Location: Prestonpans
Posts: 22,479
Thanks: 650
Thanked 4,624 Times in 3,358 Posts
|
Coolant weeping into the inlet manifold primarily affects cylinder number 4 more than any other. Had it myself, most 1.8 and 1.8T owners will get it at some point if they haven't already.
|
6th March 2019, 09:39 | #7 |
This is my second home
Roverless + 1.7D Sportage Join Date: Aug 2014
Location: East Norfolk
Posts: 7,050
Thanks: 729
Thanked 2,021 Times in 1,449 Posts
|
When it's misfiring switch off and pull the spark plugs. Check for which plug isn't firing and see what is on the plug. As said, often a sign of a failing inlet manifold gasket, easy to change and not that expensive.
__________________
Oil in my veins! |
7th March 2019, 16:27 | #8 |
Regular poster
Rover 75 Saloon Join Date: Dec 2018
Location: Reading
Posts: 43
Thanks: 22
Thanked 2 Times in 2 Posts
|
Thanks guys. I had a mechanic friend look it over and he said he could smell petrol in the coolant and concluded that it was a head gasket failure. However that would cost me more to get done than the car is worth, so I'll take your advice and replace the inlet manifold gasket. Fingers crossed! Anything special involved, or is it just a case of disconnecting everything attached to manifold, clean up any residue once it's off, and put it all back again?
|
7th March 2019, 18:11 | #9 |
This is my second home
Rover75 and Mreg Corsa. Join Date: Nov 2006
Location: Sumweer onat mote o'dust (Sagin)
Posts: 21,753
Thanks: 341
Thanked 3,660 Times in 2,924 Posts
|
Replacing the manifold gasket won't help if the head gasket has indeed failed. That diagnosis should be verified or you could end up somewhere far away with no engine at all.
TC |
7th March 2019, 19:01 | #10 |
Regular poster
Rover 75 Saloon Join Date: Dec 2018
Location: Reading
Posts: 43
Thanks: 22
Thanked 2 Times in 2 Posts
|
True that, but if it is just the manifold one then it'll cost me a tenner rather than £600. How can it be diagnosed, as presumably the symptoms of each can be the same? Cheers.
|
|
|