|
||
|
||
|
![]() |
#1 |
Avid contributor
Manual Rover 75 S Reg, Rover 75 Auto, Rover SD1 2300S, Join Date: Jul 2019
Location: Otley
Posts: 233
Thanks: 52
Thanked 87 Times in 39 Posts
|
![]() Okay my 75 failed it’s MOT today and the offside Parking Brake is inoperative how do have to take the calliper off or is there a way around it
Sent from my iPhone using Tapatalk
__________________
4th January 1999 Owner of the only Pre Production Diesel 75 Thomas |
![]() |
![]() |
![]() |
#2 |
Premium Trader
Rover 75 Join Date: Nov 2010
Location: Devon
Posts: 33,826
Thanks: 8,837
Thanked 14,831 Times in 8,030 Posts
|
![]() Caliper off, rear disc off and have a look inside Thomas, I’ll bet one or both of the retaining pins have pulled through the backplate.
__________________
Lest we forget..
|
![]() |
![]() |
![]() |
#3 |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
![]() It should look like this Thomas
![]() The wheelbearing is removed for clarity ![]() Brian ![]() |
![]() |
![]() |
![]() |
#4 |
Avid contributor
MG ZT-T Join Date: Feb 2019
Location: Stockport
Posts: 139
Thanks: 56
Thanked 22 Times in 20 Posts
|
![]() Same problem here only I can't get the caliper mounting bolts undone to see what's going on inside. 13mm ring spanner starting slipping. No shortage of Plus Gas !
Presumably I should be able to see from the other side if the pins have pulled through. Would a garage with an impact wrench be able to shift the bolts? |
![]() |
![]() |
![]() |
#5 | |
This is my second home
rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009
Location: Seaton Carew
Posts: 26,974
Thanks: 65
Thanked 7,142 Times in 4,642 Posts
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#6 | |
This is my second home
Rover 75 CDT Manual Connoisseur SE, Rover 75 CDT Automatic Connoisseur SE & a Freelander Td4. Join Date: Jul 2009
Location: Hampshire
Posts: 11,585
Thanks: 3,470
Thanked 3,119 Times in 2,247 Posts
|
![]() Quote:
Nope - not much in the way of clearance to get the rattle gun in and if you have started to round them off then all they will probably do is finish the job. Either a surface drive socket, an Irwin extractor or using a hammer and chisel would be worth a go if Ronnie's suggestion doesn't work. The hammering on can also work wonders even if you don't have a 1/2" socket - always worth giving the bolt head a good few clumps with a lump hammer and blind punch before attempting to undo it. The shock load more often than not loosens the rust enough to get the bolt moving when you get a spanner on it. . Last edited by Mike Noc; 20th April 2020 at 21:04.. |
|
![]() |
![]() |
![]() |
#7 |
Premium Trader
Rover 75 Join Date: Nov 2010
Location: Devon
Posts: 33,826
Thanks: 8,837
Thanked 14,831 Times in 8,030 Posts
|
![]() Sure does....
__________________
Lest we forget..
|
![]() |
![]() |
![]() |
#9 | ||
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,834
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
![]() Quote:
https://www.ebay.co.uk/itm/11x-Locki...MAAOSwMWdeXMhc
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " |
||
![]() |
![]() |
![]() |
#10 |
Discount MG Rover Spares
Rover 75 CDTi, 2x MG ZS180 Join Date: Jun 2011
Location: Hythe, Southampton
Posts: 11,361
Thanks: 456
Thanked 3,377 Times in 2,027 Posts
|
![]() Usually the backplates are to blame - the pins pull through, and allow the shoes to move around and out of position.
We have complete backplates containing shoes and all fixings etc - they're quite expensive, but are a good way to resolve the issue for the long-term. https://www.dmgrs.co.uk/products/r75...0290-smn000140 If you only need one side, drop me a PM and I can price one up for you if this is indeed the cause. ![]()
__________________
![]() Your trusted MG Rover specialist! Tel: 02380 001133 / Email: [email protected] We now have a 'chat' function on our site for even quicker replies. Give it a try! Remember - discount code FORUM5 for 5% off ![]() |
![]() |
![]() |
![]() |
|
|