|
||
|
8th July 2020, 16:03 | #1 |
Posted a thing or two
R75 Saloon Conn CDT SE, MG ZT190+ Join Date: Nov 2006
Location: Kingston-upon-Hull
Posts: 1,960
Thanks: 823
Thanked 426 Times in 274 Posts
|
ZT 190 throttle body including Traction control
As above, I'm after a 190 throttle body complete with traction control, I have all the other bits to do the job but the throttle body I have is for a V6 Rover, obviously the bits wont swap over as the internal diameter for the 190 is larger.
Thanks, Roy |
8th July 2020, 19:20 | #2 |
Premium Trader
Rover 75 Join Date: Nov 2010
Location: Devon
Posts: 33,821
Thanks: 8,837
Thanked 14,831 Times in 8,030 Posts
|
Good luck....
__________________
Lest we forget..
|
9th July 2020, 09:07 | #3 |
Posted a thing or two
Alpina D3 Join Date: Sep 2014
Location: Cheslyn hay
Posts: 1,026
Thanks: 58
Thanked 294 Times in 227 Posts
|
Internal diameter is the same providing its the throttle body off a 2.5L. The difference is the cam on the side. It requires less pedal travel for it to be fully open.
|
9th July 2020, 14:55 | #4 |
Posted a thing or two
R75 Saloon Conn CDT SE, MG ZT190+ Join Date: Nov 2006
Location: Kingston-upon-Hull
Posts: 1,960
Thanks: 823
Thanked 426 Times in 274 Posts
|
I thought the 190 had a 80mm "bore" in the throttle body and all the other V6 variants were smaller?
Last edited by maxi_crawf; 9th July 2020 at 14:58.. |
9th July 2020, 14:57 | #5 |
Posted a thing or two
Alpina D3 Join Date: Sep 2014
Location: Cheslyn hay
Posts: 1,026
Thanks: 58
Thanked 294 Times in 227 Posts
|
|
9th July 2020, 15:04 | #6 |
Posted a thing or two
R75 Saloon Conn CDT SE, MG ZT190+ Join Date: Nov 2006
Location: Kingston-upon-Hull
Posts: 1,960
Thanks: 823
Thanked 426 Times in 274 Posts
|
|
9th July 2020, 15:09 | #7 |
Posted a thing or two
R75 Saloon Conn CDT SE, MG ZT190+ Join Date: Nov 2006
Location: Kingston-upon-Hull
Posts: 1,960
Thanks: 823
Thanked 426 Times in 274 Posts
|
I think I'm going to have to have a much closer look at the body on the 190 and the "spare" I have. if it's just a case of swapping the cam over from white to red it would save a lot of messing about.
|
|
|