|
||
|
14th September 2020, 18:57 | #1 |
Regular poster
Rover 75 Saloon Join Date: Aug 2020
Location: Dorset/Hampshire border
Posts: 55
Thanks: 27
Thanked 10 Times in 6 Posts
|
Rover 75 CDTi fuel check valve (under fuel filter)
Hi All
I have a very slow diesel leak from the hose going to the front end of the fuel check valve, under(ish) the fuel filter. There's a jubilee clip on there so it looks like someone's had a go at a repair before. I'm looking at replacing the hose as I'm thinking this is most likely the problem part but thinking I might replace the valve as well. Is it generally the hose or the valve that's at fault? Do folks replace the valve and what with? I'm guessing the front end (with the metal ring) is the inlet? What's the size of the fitting on the T-piece at the other end of the hose? Hopefully 8 mm. That's a few questions but hopefully someone can help. Cheers. Van |
14th September 2020, 23:39 | #2 | |
Regular poster
NONE AT THE MOMENT Join Date: Jul 2016
Location: Christchurch Dorset--Murcia Spain
Posts: 78
Thanks: 13
Thanked 18 Times in 10 Posts
|
Quote:
|
|
16th September 2020, 19:04 | #3 |
Regular poster
Rover 75 Saloon Join Date: Aug 2020
Location: Dorset/Hampshire border
Posts: 55
Thanks: 27
Thanked 10 Times in 6 Posts
|
Thanks Tony - looks like you are near me (when you're not in Spain) as I am in Highcliffe.
|
17th September 2020, 15:47 | #4 |
Regular poster
NONE AT THE MOMENT Join Date: Jul 2016
Location: Christchurch Dorset--Murcia Spain
Posts: 78
Thanks: 13
Thanked 18 Times in 10 Posts
|
|
Thread Tools | |
Display Modes | |
|
|