|
||
|
22nd July 2021, 08:25 | #1 |
Newbie
MGZT Join Date: Jul 2021
Location: Bishop Auckland
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
New door finisher riser - rubber seals
Hi all
I need to replace the finisher riser on my drivers door and am reluctant to do so until I can source a set of seals - disturbing the originals is bound to crack or shear them. So far impossible to find on ebay or parts websites...does anyone have any ideas please? |
22nd July 2021, 10:58 | #2 | |
Moderator / RS North East
MG ZT T 180,MGF Freestyle, Jaguar XKR Convertible and XF Join Date: Jan 2008
Location: Newton Aycliffe
Posts: 6,397
Thanks: 1,329
Thanked 2,231 Times in 1,309 Posts
|
Quote:
Do you mean these ? https://www.ebay.co.uk/itm/124303836...8AAOSwUolfPD12 And regarding the door seals, depends on if your car is Mk1 or Mk 2. Mark 1 had velour and Mark 2 Plastic Stu |
|
22nd July 2021, 11:24 | #3 |
This is my second home
ZT260 #243 (resting) Join Date: May 2010
Location: Prestonpans
Posts: 22,424
Thanks: 650
Thanked 4,624 Times in 3,358 Posts
|
I think its the B pillar finisher he's referring to Stu.
I changed the ones on the 1.8T I used to have, not an easy job but had no trouble with nor caused any damage to the seals. Just take your time and do it on a hot day! By the way Peter, if one side needs changing then the other will as well. They rust from the inside, by the time anything appears on the outside then the inside will be rotten. Mine had a few rust bubbles appearing on the outside but when I got them off discovered the inside of both was gone. |
22nd July 2021, 13:07 | #4 |
Regular poster
75 saloon Join Date: Jul 2021
Location: Valletta
Posts: 79
Thanks: 35
Thanked 25 Times in 10 Posts
|
I just removed one of those door exterior b post trim panels. the rubber seals can be moved out of the way with no harm done. and yes, it was far more rotten than it appeared to be from the outside.
|
22nd July 2021, 16:30 | #5 |
Newbie
MGZT Join Date: Jul 2021
Location: Bishop Auckland
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Door finisher riser - window seals
Thanks Stu, but I am looking for the window rubbers around the inside of the window frame.
|
22nd July 2021, 16:32 | #6 |
Newbie
MGZT Join Date: Jul 2021
Location: Bishop Auckland
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Door finisher riser - window seals
Thanks Steve.....will give it a try!
|
Thread Tools | |
Display Modes | |
|
|