|
||
|
17th August 2021, 13:39 | #1 |
Newbie
rover 75 connoisseur Join Date: Aug 2021
Location: leatherhead
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
ICE replacement unit
Hi
2001 rover 75 connoisseur 2.0 CDT Does anyone have a wiring digram showing the wire colours to allow me to run a new loom FROM the "radio receiver unit" - in the boot ( per the rover factory manual )to the facia - to connect a replacement ICE unit Apparently I need to do this according to "dynamic sounds" (a firm recommended by this forum) Thanks |
17th August 2021, 17:12 | #2 |
I really should get out more.......
Now Other Manufacturer Join Date: Nov 2006
Location: Co. Kerry
Posts: 2,786
Thanks: 16
Thanked 310 Times in 283 Posts
|
The audio loom is connected to the main car loom via a BMW 17pin connector in the centre console behind the ashtray unit. It would be easier to use a BMW adapter lead (usually BMW to ISO) from there to the new unit.
|
17th August 2021, 20:35 | #3 |
Posted a thing or two
Rover 75 Cont SE 1.8T Join Date: Aug 2010
Location: Cheshire
Posts: 1,082
Thanks: 215
Thanked 232 Times in 178 Posts
|
Presumably if you have the boot-mounted radio module then your car has/had sat nav.
To fit a new head unit you will have to run a new coaxial aerial cable forward either from the radio signal booster on the c-pillar or from the boot to the head unit.
__________________
Rover 75 1.8T Contemporary SE Auto Starlight Silver MBB |
|
|