75/ZT In Car System with GPS DVD Plug and Play

[Soulblighter47]

Thanks for the information Mintman! I'll keep you informed.

[Soulblighter47]

I got more informations: customs forced my unit to be send back. So it will go back to you Sean. I mean at the return adress: to your chinese agent? They said me it could be cause of lack of CE certification, like mintman said. What do you think will happen now Sean?

[Radioguy]

Para99
I received this response in regards to the DVB-T

the solution is to remove the filter device in the power line, then connect the line direct to a 12v power The filter device is the one in the small picture.


Hopefully this will resolve it.

Originally Posted by para999

Home now....semi-installed it...but can't get the sat-nav to work! The map is stuck in Belgium and the unit is not locating satellites!

Also, the DVB-T works fine for a couple of minutes, then cuts out. The red power light on the DVB-T unit goes dim as if on low power....

I think I have followed the installation instructions properly....

Any ideas anyone?? Radioguy??

[Radioguy]

Hi Soulblighter. In 4 years and 1000's of units I have never heard of this happening. These are Supposedly ALL CE approved. I have requested a copy of the CE certificate from the factory. I hope that we will not have to import it again into China and then resend it. For sure they will want shipping costs to send it out again. It seems pretty unfair that they arbitrarily made that decision without requesting the certificates. We will handle this.

Originally Posted by Soulblighter47

I got more informations: customs forced my unit to be send back. So it will go back to you Sean. I mean at the return adress: to your chinese agent? They said me it could be cause of lack of CE certification, like mintman said. What do you think will happen now Sean?

[tony_fry]

Originally Posted by para999

Thanks Tony...did that and is now working. All I have to do now with the satnav is to try and work out how to get the orientation right as it's now showing permanent North! Will try and work it out through the night!!

If you have any questions about IGO, please feel free to ask me, I have been "playing" with it for a couple of years now, so I "do" know quite a bit about it

[M9_Nut]

Stux,
Mine is still stuck in limbo too :-
2010-04-29 SHENZHEN Despatch from Sorting Center
Bloomin ash cloud!

Shouldn't be too long now though, as others have said, about 7-10 days later it pops up again, though it might be a couple of days longer due to the ash.

[dudepop]

are these units being delivered via ups, i recieved a ups tracking number yesterday but im expecting a few things thro the post

[David Lawrence]

Originally Posted by tony_fry

I have classic FM with no problem and I will install the aerial amp which I already have.

I now have MAJOR problem, on my way home last night the IGO run out of memory (which it sometimes does, as a few members will tell you) I restarted the program and now I get "No Navigation Software Found" when I go into the settings it no longer shows the SD card, mmm I thought I would format the SD card that came with the unit and copy the program back, I also done another SD card, just in case the original SD was faulty, but it still does not show on the setup.

I have done a hard reset, but it does not make any difference, the GPS SD card does not show on the setup and I nave now lost the SAT NAV on the unit

When you do the hard reset, the unit forgets where to look for the IGO EXE file, so you have to direct it back to the memory card again. Is the unit seeing anything on your SD card?

It needs to look on the SD and not on the one called "NAND FLASH"

[tony_fry]

Nothing is showing it's like the card is blank

[stux99]

I had this with mine, found I had to create root folder "gpslog" as well as iGo then it worked