Wanted - MDF Speaker Rings

Jakg · 21st September 2010, 22:22

Don't really have the skill / patience / tools to make a set up for myself.

Ideally looking for all 4, but the front 2 will do for now.

Can swap for the OEM ones if you'd like, or just pay outright.

Let me know what you have!

radi8or · 22nd September 2010, 09:05

Hi Jack,

I have 4 left over from when I changed the speakers in my car, didn't fit the rings in the rear, they are only 18mm thick so you have to double up,
175mm O/D x 145 I/D, OK for 6 1/2" speakers.

Yours for postage, PM your address if interested.

If you need more or a different size I got these off e-bay.

Spanky · 22nd September 2010, 10:43

Quote:

Originally Posted by radi8or

Hi Jack,

I have 4 left over from when I changed the speakers in my car, didn't fit the rings in the rear, they are only 18mm thick so you have to double up,
175mm O/D x 145 I/D, OK for 6 1/2" speakers.

Yours for postage, PM your address if interested.

If you need more or a different size I got these off e-bay.

Can you post where you got them from on eBay, as I wouldn't mind some of these for my ZT.

radi8or · 22nd September 2010, 10:55

Lots of different ones here here

HTH

radi8or · 22nd September 2010, 11:00

Yep they were a bit of a pain had to hack them quite a bit, which is why you have to use two stuck together, also why I never done the rears,

No one sits in the back anyway

Jakg · 24th September 2010, 09:14

Well thanks to radi8or I now have 4 rings which can do a pair of doors - still need to do the fronts though, so if anyone has the fronts already shaped that would help massively.

Jakg · 22nd September 2010, 10:52

Actually i've just been doing some more research - the reason why I wanted someone to make them for me was because they look quite annoying to make for the fronts due to needing to be curved etc:

The rears are much flatter which is what I think you have.

Jakg · 5th October 2010, 22:17

Bump? Still need some for the front

vindaloo · 30th December 2010, 15:58

Quote:

Originally Posted by Jakg

Bump? Still need some for the front

Did you manage to get some of these?
I'm also after a set for the front only & I don't have the skill/ tools to make them.

Is there anyone willing to make these for money of course?

Jakg · 21st September 2011, 10:18

Bump - A member very kindly sent me the bare MDF rings - but the problem is that I don't have the tools (or the skills) to make the proper shaped ones like these:

Cash waiting for someones work

21st September 2010, 22:22	#1
Jakg This is my second home N/A Join Date: Feb 2010 Location: Suffolk Posts: 6,867 Thanks: 0 Thanked 397 Times in 302 Posts	Wanted - MDF Speaker Rings Don't really have the skill / patience / tools to make a set up for myself. Ideally looking for all 4, but the front 2 will do for now. Can swap for the OEM ones if you'd like, or just pay outright. Let me know what you have!

22nd September 2010, 09:05	#2
radi8or Gets stuck in Rover 75 Saloon Join Date: Nov 2006 Location: Dagenham Posts: 760 Thanks: 11 Thanked 11 Times in 10 Posts	Hi Jack, I have 4 left over from when I changed the speakers in my car, didn't fit the rings in the rear, they are only 18mm thick so you have to double up, 175mm O/D x 145 I/D, OK for 6 1/2" speakers. Yours for postage, PM your address if interested. If you need more or a different size I got these off e-bay. __________________ Regards. Bob Member # 45

22nd September 2010, 10:55	#4
radi8or Gets stuck in Rover 75 Saloon Join Date: Nov 2006 Location: Dagenham Posts: 760 Thanks: 11 Thanked 11 Times in 10 Posts	Lots of different ones here here HTH __________________ Regards. Bob Member # 45

22nd September 2010, 11:00	#5
radi8or Gets stuck in Rover 75 Saloon Join Date: Nov 2006 Location: Dagenham Posts: 760 Thanks: 11 Thanked 11 Times in 10 Posts	Yep they were a bit of a pain had to hack them quite a bit, which is why you have to use two stuck together, also why I never done the rears, No one sits in the back anyway __________________ Regards. Bob Member # 45

24th September 2010, 09:14	#6
Jakg This is my second home N/A Join Date: Feb 2010 Location: Suffolk Posts: 6,867 Thanks: 0 Thanked 397 Times in 302 Posts	Well thanks to radi8or I now have 4 rings which can do a pair of doors - still need to do the fronts though, so if anyone has the fronts already shaped that would help massively.

22nd September 2010, 10:52	#7
Jakg This is my second home N/A Join Date: Feb 2010 Location: Suffolk Posts: 6,867 Thanks: 0 Thanked 397 Times in 302 Posts	Actually i've just been doing some more research - the reason why I wanted someone to make them for me was because they look quite annoying to make for the fronts due to needing to be curved etc: The rears are much flatter which is what I think you have.

5th October 2010, 22:17	#8
Jakg This is my second home N/A Join Date: Feb 2010 Location: Suffolk Posts: 6,867 Thanks: 0 Thanked 397 Times in 302 Posts	Bump? Still need some for the front

21st September 2011, 10:18	#10
Jakg This is my second home N/A Join Date: Feb 2010 Location: Suffolk Posts: 6,867 Thanks: 0 Thanked 397 Times in 302 Posts	Bump - A member very kindly sent me the bare MDF rings - but the problem is that I don't have the tools (or the skills) to make the proper shaped ones like these: Cash waiting for someones work