|
|
|
|
|
|
||
|
|
||
20th November 2016, 08:35
|
#1 |
|
Loves to post
Rover 75 saloon 2.0l Diesel Connoisseur Join Date: Apr 2016
Location: Wokingham
Posts: 259
Thanks: 136
Thanked 21 Times in 15 Posts
|
Sunroof Assembly?
A few weeks ago I posted about a persistant and growing rattle on my 75 sunroof and Ive managed to narrow it down a bit further. If gently push the glass up, on the drivers side the glass lifts a few mm upwards. Apparently the runner connected to the glass is loose on the metal slide underneath.
Anyone who has dismantled sunrooves here know what might be the cause of that looseness? The runner is fitted firmly to the glass, and the slide it runs on is fitted firmly to the car, something that holds those two against each other isnt holding it tight enough. All the torcs are tight  TIA
__________________
Gearbox change, clutch, subframe refurbish, handbrake mod, drumbrake repair, rear coils, plate PCB repair, sunroof drains refitted, trim leak fix, cruise control fix, cleared EGR/inlet, new strut bearings, USB sockets in rear ashtray, new front brake pipes/hoses, repaired undertray, new o/s rear upper arm, refurbished rear suspension&subframe, fixed back light leak, new exhaust, fitted HID xenons, FBH fix, new thermostat, armrest LEDs, wood dash, new hydromount, natnav, tyres, numberplates |
|
|
 |
|
|
Linear Mode
