|
||
|
11th May 2015, 16:08 | #1 |
Posted a thing or two
R75 Saloon Conn CDT SE, MG ZT190+ Join Date: Nov 2006
Location: Kingston-upon-Hull
Posts: 1,960
Thanks: 823
Thanked 426 Times in 274 Posts
|
DVB-T2 digibox problem
Well I finally decided to have a go fitting my digibox as above, the problem is, no picture
I have connected up the power lead as mentioned on another thread (live feed from the TV tuner and a switched live from the radio box and earth to the body) I assume it must be ok as the LED power lamp lights up on the digibox, the antenna is connected as is the remote "eye" I have the three RCA? plugs from the back of the digibox connecting to the separate short "splicing/adaptor cable/loom that goes between the TV tuner and the original plug so you can "inject" the digibox signal into the loom, the TV/monitor screen is switched to the AV channel but there is nothing, just a blank screen with the word "mute" at the bottom, does not matter what you press on the remote hand set nothing happens, by the way the remote handset is working. Any chance it's something really simple I have forgotten to do, it probably is |
11th May 2015, 16:26 | #2 |
This is my second home
fiat panda Join Date: Sep 2009
Location: haverhill
Posts: 6,720
Thanks: 96
Thanked 586 Times in 526 Posts
|
it is not picking up a signal.try moving to another area.its for this reason I took mine out.i thought mine was duff.moved up the road all was well.(we live in a dip).but after that it was very hit and miss.worth a try anyhow
__________________
fiat panda 1.2 eco |
11th May 2015, 16:40 | #3 |
Posted a thing or two
R75 Saloon Conn CDT SE, MG ZT190+ Join Date: Nov 2006
Location: Kingston-upon-Hull
Posts: 1,960
Thanks: 823
Thanked 426 Times in 274 Posts
|
Thing is, there is nothing on the screen not even a "no signal" message, I assumed that there will be something on the screen same as you get with a TV at home, does not the digibox itself put some kind of "set up" message to tell you what to do, on the monitor?
|
11th May 2015, 17:19 | #4 |
This is my second home
fiat panda Join Date: Sep 2009
Location: haverhill
Posts: 6,720
Thanks: 96
Thanked 586 Times in 526 Posts
|
it should go into the set up menu.then you tune it in to get the stations.i was then I could get nothing until I moved the car.you must have answer A a duff box.or B it connected up it wrong. I no I found it a bit confusing with the av in and out bit .and on mine it turned out you connect it the opposite to what my feeble brain was telling me
__________________
fiat panda 1.2 eco |
11th May 2015, 17:21 | #5 |
This is my second home
Audi Q3 TDI S-Line Quattro Join Date: Jul 2007
Location: Clacton On Sea/On the boat somewhere
Posts: 51,193
Thanks: 9,890
Thanked 12,235 Times in 8,232 Posts
|
You should still get the on screen display up when you press menu on the remote regardless of aerial signal
I would double check that the yellow (video) RCA connector is in the correct Av in connection on the double din and not in the camera in or the Av out If all that is correct then as Phil says, possibly a duff box !
__________________
Jeff. |
11th May 2015, 18:47 | #6 |
Posted a thing or two
R75 Saloon Conn CDT SE, MG ZT190+ Join Date: Nov 2006
Location: Kingston-upon-Hull
Posts: 1,960
Thanks: 823
Thanked 426 Times in 274 Posts
|
There is no rca connector on the back of the double din, it's an original highline TV monitor/screen
|
11th May 2015, 18:50 | #7 |
This is my second home
Audi Q3 TDI S-Line Quattro Join Date: Jul 2007
Location: Clacton On Sea/On the boat somewhere
Posts: 51,193
Thanks: 9,890
Thanked 12,235 Times in 8,232 Posts
|
Sorry, didn't notice this was posted in the factory Highline section in your thread so presumed it was plugging in to an aftermarket double din, however the theory on it being connected to the correct wires in the car loom still stand
__________________
Jeff. |
11th May 2015, 18:56 | #8 | |
Posted a thing or two
R75 Saloon Conn CDT SE, MG ZT190+ Join Date: Nov 2006
Location: Kingston-upon-Hull
Posts: 1,960
Thanks: 823
Thanked 426 Times in 274 Posts
|
Quote:
All the rest was from Radioguy. Last edited by maxi_crawf; 11th May 2015 at 18:59.. |
|
11th May 2015, 19:20 | #9 |
This is my second home
rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009
Location: Seaton Carew
Posts: 26,935
Thanks: 65
Thanked 7,142 Times in 4,642 Posts
|
Sorry if I've misunderstood, but is it not the AUX you need to switch to & not AV Just been reading Canonite's thread on the subject & that's what was said Ignore me if I've got the wrong end of the stick
|
11th May 2015, 19:21 | #10 |
Posted a thing or two
R75 Saloon Conn CDT SE, MG ZT190+ Join Date: Nov 2006
Location: Kingston-upon-Hull
Posts: 1,960
Thanks: 823
Thanked 426 Times in 274 Posts
|
I can't really see how I've gone wrong as it's all colour coded, if I got the permanent and switched live the wrong way round could that do it?
|
|
|