|
||
|
8th May 2022, 14:27 | #1 |
Newbie
Rover 75 Saloon Join Date: Nov 2020
Location: Khartoum
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
|
Fuel Pump & Fuel sender installation
Dears
I need a clear photo or instructions about how to connect the in tank fuel pump and the fuel sender for a [ Rover 75 - KV6 engine - model 2005] |
9th May 2022, 07:00 | #2 |
Doesn't do things by halves
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,382
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
|
Both the pump and the fuel level sender connections are on a single plug Ayman. Could you explain exactly what the problem is please?
Simon
__________________
"Whatever is rightly done, however humble, is noble." Sir Henry Royce. |
9th May 2022, 11:38 | #3 |
Newbie
Rover 75 Saloon Join Date: Nov 2020
Location: Khartoum
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
|
According to the image , there are two pipes
which one is to be connected to the pump ? https://rimmerbros.com/Item--i-WGS100072 Last edited by Ayman; 9th May 2022 at 11:41.. |
9th May 2022, 13:03 | #4 |
Doesn't do things by halves
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,382
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
|
Hi Ayman,
Ahh sorry, I thought you were asking about electrical connections! You didn't note the locations of the various pipes when you removed the pump then? The MGR workshop manual shows two hoses attached to the pump unit by means of an "adaptor". The implication is that it is not possible to connect them the wrong way around. Sorry, I can't help any more than that. Simon
__________________
"Whatever is rightly done, however humble, is noble." Sir Henry Royce. |
10th May 2022, 07:42 | #5 |
Newbie
Rover 75 Saloon Join Date: Nov 2020
Location: Khartoum
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
|
Thanks Simon
I will connect them and feed you back Ayman |
|
|