|
||
|
14th July 2019, 14:43 | #1 |
Posted a thing or two
75 Conn S.E. Cdt. Join Date: May 2007
Location: Merseyside
Posts: 1,803
Thanks: 1,873
Thanked 52 Times in 49 Posts
|
Door mirrors switch.
Hello, I tried to adjust my door mirrors electrically, no joy. I stripped the door/window switch and cleaned the contacts with Isopropyl, the mirror light came on but no movement. The windows worked but after trying the mirrors again everything went off. I have a spare switch pack and tried that, the mirrors are dead and the windows open and close, then all the power goes and the l/r mirror light goes out and the power goes. Any advice please?. Thanks, John.
|
15th July 2019, 08:36 | #2 |
This is my second home
fiat panda Join Date: Sep 2009
Location: haverhill
Posts: 6,720
Thanks: 96
Thanked 586 Times in 526 Posts
|
clean it again but do not use ipa just rub over the contacts with a rubber as in one on the end of a pencil.will cost nowt and worth a try .other than that the switch has had it
__________________
fiat panda 1.2 eco |
15th July 2019, 12:28 | #3 |
Gets stuck in
75 Tourer CDTi Connie SE Join Date: Jun 2017
Location: Keith, Banffshire
Posts: 686
Thanks: 431
Thanked 132 Times in 105 Posts
|
Pencil rubber worked for me when I first took ownership of my tourer with its 'broken' electric mirrors!
__________________
My 75 Tourer CDTi was born Saturday, 21st June 2003 @ 09:50 My 75 was the 18,749th 75 Tourer to run off the production line, out of 27,407 It was the 195th 75 Tourer CDT Connoisseur SE (135) to be made out of 2,074 and the 1,789th 75 Tourer in Wedgewood Blue Metallic (code: JEL) to be made out of 1,871 Wedgewood Blue Metallic 75 Tourers |
15th July 2019, 19:48 | #4 |
Regional Secretary
Rover 1.8T Tourer Join Date: May 2007
Location: Heathrow
Posts: 6,948
Thanks: 1,551
Thanked 2,036 Times in 1,264 Posts
|
|
16th July 2019, 13:38 | #5 |
Posted a thing or two
75 Conn S.E. Cdt. Join Date: May 2007
Location: Merseyside
Posts: 1,803
Thanks: 1,873
Thanked 52 Times in 49 Posts
|
Thanks for all the tips, I have a non powerfold switch pack as a spare, I have now got everything working again. Can I swop the innards into my non working powerfold pack as there seems to be no difference in the two other than the powefold pack has the extra hole for the button?. Thanks, John.
|
16th July 2019, 13:57 | #6 | |
Premium Trader
75 CDT Tourer,2.5 Launch Saloon, Omipro MG/Rover (T4) Join Date: Jul 2007
Location: Liversedge, West Yorkshire
Posts: 5,405
Thanks: 1,105
Thanked 1,340 Times in 661 Posts
|
Quote:
The board is physically the same size and will fit but there's lots of components missing on the non ppwerfold ones including the relay for the powerfold operation that's unobtainable as a separate part. Easiest solution is your powerfold one is faulty is a replacement I'm afraid. Russ
__________________
Replacement Key Service http://https://the75andztclub.co.uk/...d.php?t=244732 Full T4 Testbook diagnostics available. Diesel ECU repair and replacement. Options enabled or disabled as required. Diesel X-Power 135 and 160bhp, Rover 1.8T 150 to 160 MG 160 V6 to 177 upgrades available P.M. for details. |
|
16th July 2019, 14:15 | #7 |
Posted a thing or two
75 Conn S.E. Cdt. Join Date: May 2007
Location: Merseyside
Posts: 1,803
Thanks: 1,873
Thanked 52 Times in 49 Posts
|
Hi Russ, I trust you are well, thanks for the reply. I will have to wait a while before I can splash out. Thanks, John.
|
|
|