|
||
|
15th August 2019, 13:48 | #1 |
Newbie
Rover 75 Saloon Join Date: Aug 2019
Location: Ivanovo
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|
synchronization mems 3 and ews
Good day. please tell me, I have 75 1.8L non turbo rover in Russia. and we have a bad situation with servicing these machines. by what means can synchronization of the engine control unit and immobilizer be made? What software can this, or which adapter?
(Of course, apart from Testbook t4 - since I won’t find it in the next 400 km) I will be very happy for your help! |
15th August 2019, 18:40 | #2 |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
What are you trying to achieve?
A second hand MEMS unit cannot be paired with an EWS, in fact all of the ECM types once paired with an EWS cannot be paired with another EWS. If you are replacing a defective MEMS unit with a second hand one, the 93C66 EEProm can be removed from the original unit and fitted to the replacement, meaning the rolling code is the same as the one expected by both the EWS and MEMS. Hope this helps Brian |
16th August 2019, 18:04 | #3 |
Newbie
Rover 75 Saloon Join Date: Aug 2019
Location: Ivanovo
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|
I am not trying to change blocks (ews, ecu), I have lost the synchronization of these blocks. the car starts and immediately stalls. I can read dumps ews and 93cc66. how to do synchronization? I know that you can write three dumps ews, 93cc66, 29f200 from the donor and it will work. bmw just does synchronization in inpa, a couple of button presses
|
16th August 2019, 19:47 | #4 |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
Yes, T4 does the same as INPA, in fact it is also based on EDIABAS
No shortcuts I'm afraid it needs to be done using T4. Brian |
16th August 2019, 20:01 | #5 |
Newbie
Rover 75 Saloon Join Date: Aug 2019
Location: Ivanovo
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|
I can’t find t4 here. didn’t you really do anything? can I somehow remove the immobilizer!? how do i eat by car?)
|
17th August 2019, 08:08 | #6 | |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
Quote:
Which reminds me, I wonder whether Reebs has managed to remove the EWS from OVP yet? I've the replacement EWS lined up Paul Brian |
|
17th August 2019, 09:22 | #7 |
Newbie
Rover 75 Saloon Join Date: Aug 2019
Location: Ivanovo
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|
can you know? I need pinout of the bdm connector on the mems 3 rover 75 1.8 board
https://ibb.co/w03qtHP |
17th August 2019, 19:56 | #8 |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
This is what you are after Alex, is it not?
I've emailed you the revised binary for you to write to both your EWS and MEMS And all done without breaking a nail Brian |
18th August 2019, 07:39 | #9 |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
"Sits back and awaits with bated breath the results of this experiment"
Hopefully this little exercise will have Alex up and running today Brian |
19th August 2019, 08:22 | #10 |
Newbie
Rover 75 Saloon Join Date: Aug 2019
Location: Ivanovo
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|
your dumps you made to me don't work. the car starts and stalls as well !
|
Thread Tools | |
Display Modes | |
|
|