Wanted - broken Dyson or bits

StewartIngram · 7th April 2020, 11:24

Rather unusual request!
Dyson DC44 animal, the one with the motorised brush head (on the floor). Anyone got a broken one or some bits? I've lost the bearing at the end of the rotating brush.

Stewart

Raven Black · 8th April 2020, 11:53

Hi I have one, I still use the hand held but don't need the floor unit, which bit is it? Can I remove it?
Regards Jennifer

StewartIngram · 8th April 2020, 15:02

Thanks for reply. I have some pics to explain.
1. A view of the head on my DC44. It is possible other heads will fit, or contain the part I need.
2. The LH end of the head, where the brush comes out. This is the wrong end.
3 The RH end of the brush roller. Not the triangular centre. This locates in my missing part.
4. The RH end of the head, with the part missing, though the silver screw is in place. I've called it a bearing, though I suppose it realler is an adaptor that fits onto the bearing that is still in the head.

Raven Black · 8th April 2020, 16:05

Ok am sure I have that, let me have your address and will post it to you.
Cheers Jennifer

StewartIngram · 8th April 2020, 18:00

Thanks, you have a PM

7th April 2020, 11:24	#1
StewartIngram Gets stuck in Rover 75 Connoisseur 2.5 V6 auto Join Date: Jan 2008 Location: Chatteris, Cambridgeshire Posts: 902 Thanks: 320 Thanked 159 Times in 127 Posts	Wanted - broken Dyson or bits Rather unusual request! Dyson DC44 animal, the one with the motorised brush head (on the floor). Anyone got a broken one or some bits? I've lost the bearing at the end of the rotating brush. Stewart

8th April 2020, 11:53	#2
Raven Black Gets stuck in Rover 75 saloon Join Date: Jan 2019 Location: Horley Posts: 877 Thanks: 703 Thanked 267 Times in 198 Posts	Dc 44 Hi I have one, I still use the hand held but don't need the floor unit, which bit is it? Can I remove it? Regards Jennifer __________________ 2002 Connie SE CDTi Raven Black saloon 1978 MGBGT Brooklands Green

8th April 2020, 15:02	#3
StewartIngram Gets stuck in Rover 75 Connoisseur 2.5 V6 auto Join Date: Jan 2008 Location: Chatteris, Cambridgeshire Posts: 902 Thanks: 320 Thanked 159 Times in 127 Posts	Thanks for reply. I have some pics to explain. 1. A view of the head on my DC44. It is possible other heads will fit, or contain the part I need. 2. The LH end of the head, where the brush comes out. This is the wrong end. 3 The RH end of the brush roller. Not the triangular centre. This locates in my missing part. 4. The RH end of the head, with the part missing, though the silver screw is in place. I've called it a bearing, though I suppose it realler is an adaptor that fits onto the bearing that is still in the head. Last edited by StewartIngram; 26th September 2021 at 08:48..

8th April 2020, 16:05	#4
Raven Black Gets stuck in Rover 75 saloon Join Date: Jan 2019 Location: Horley Posts: 877 Thanks: 703 Thanked 267 Times in 198 Posts	Part Ok am sure I have that, let me have your address and will post it to you. Cheers Jennifer __________________ 2002 Connie SE CDTi Raven Black saloon 1978 MGBGT Brooklands Green

8th April 2020, 18:00	#5
StewartIngram Gets stuck in Rover 75 Connoisseur 2.5 V6 auto Join Date: Jan 2008 Location: Chatteris, Cambridgeshire Posts: 902 Thanks: 320 Thanked 159 Times in 127 Posts	Thanks, you have a PM