|
|
|
|
|
|
||
|
|
||
1st November 2020, 14:03
|
#1 |
|
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
Grease valve & springs?
Should there be any grease on the cone-shaped end of this valve?
 It's the Fast Idle Valve (or Idle Air Control Valve, aka IACV in RAVE) from the throttle body. When I took it off its housing I found some black stuff on the cone and the cone seat - it could have been oil sludge or it could have been grease, I can't tell which. The above pic is after I cleaned it btw. I took the throttle body off to a) clean it (see mess below!) and b) get it out of the way while I lowered the gearbox using the crossbeam and threaded rod method.  Also, should those springs be greased? |
|
|
 |
|
|
Linear Mode
