|
||
|
25th February 2021, 10:45 | #1 |
Regular poster
Rover 75 auto saloon Join Date: Jan 2012
Location: Walton on Thames
Posts: 36
Thanks: 6
Thanked 3 Times in 3 Posts
|
Does it need programming?
My Rover 75 2.5 Contempoary has a small box to the left under the steering wheel towards the footwell. It is marked:YWC104130
On checking for a replacement it seems it is a part of the Control unit-microwave burglar alarm - I've ordered a new one (even though it is listed by Rimmers as a part for a Rover 600!) - the question is: Does it need programming prior to use? If so, is there anyone who can help with this? Please let me know and any associated costs. Help! |
25th February 2021, 10:57 | #2 |
Premium Trader
Rover 75 Join Date: Nov 2010
Location: Devon
Posts: 33,710
Thanks: 8,837
Thanked 14,831 Times in 8,030 Posts
|
Yes the ews will need reprogramming, what is the issue with your original one?
__________________
Lest we forget..
|
25th February 2021, 13:39 | #3 |
Premium Trader
75 CDT Tourer,2.5 Launch Saloon, Omipro MG/Rover (T4) Join Date: Jul 2007
Location: Liversedge, West Yorkshire
Posts: 5,405
Thanks: 1,105
Thanked 1,340 Times in 661 Posts
|
As above what issues are you having?
That part number now relates to the transponder ring for a 600 not the part in your picture Over the years they've had various part numbers, the current replacement one is: YWC107200 I can transfer your original to a good used replacement it should be then just a case of plug and play. Drop me a message with a contact number and will be happy to call you and answer any questions. Russ
__________________
Replacement Key Service http://https://the75andztclub.co.uk/...d.php?t=244732 Full T4 Testbook diagnostics available. Diesel ECU repair and replacement. Options enabled or disabled as required. Diesel X-Power 135 and 160bhp, Rover 1.8T 150 to 160 MG 160 V6 to 177 upgrades available P.M. for details. |
25th February 2021, 14:25 | #4 |
Regular poster
Rover 75 auto saloon Join Date: Jan 2012
Location: Walton on Thames
Posts: 36
Thanks: 6
Thanked 3 Times in 3 Posts
|
re: replies 'Does it need programming'
my email: [email protected]
Text and 'phone: 07778177108 Happy to be contacted. Thank you for your very helpful replies. Any help is appreciated. The part number I've ordered is written on the unit. From the notes received it seems this may be incorrect. The new part is on its way way from Rimmer Bros - I'll then find out if it is indeed incorrect. If so I'll have to re-order. The reason for needing a replacement is that the sunroof drain pipe has, over time, become disconnected and caused water to ingress the unit and corroded it. This causes the engine to be imobilised. Consequently I've ordered replacement drainage tubes as well as the part number shown. All a bit of a muddle really - with the changes of part numbers! |
Thread Tools | |
Display Modes | |
|
|