what is the torque setting for

[macafee2]

Originally Posted by T-Cut

Next question, how will you measure 9Nm?

Without access to rather expensive kit, you should use your judgement. 9Nm is a single hand nip using a 6" spanner/socket wrench.


TC

as there are a few nuts and bolts less then 22nm I bought myself a torque wrench that does 5-20 or 22nm. Been watching out for one for best part of a year and one came up "cheap", brand new.
I now cover 5 to 400nm.

I had to practice 9nm on the work bench and vice as the click in the torque wrench is very very light.

macafee2

[T-Cut]

The torque settings for all the usual bolts are also given in the Haynes manual.


TC

[macafee2]

Originally Posted by T-Cut

The torque settings for all the usual bolts are also given in the Haynes manual.


TC

I just could not find these ones.

macafee2

[macafee2]

why did I not write down the torque figure, again I could not find it and have had to come back to this thread, will I ever learn???
9nm, this time i'll write it down

macafee2