Group Buy - Rear Upper Suspension Arms. Available to order here from £79.99.

[DMGRS]

**UPDATE - NOW AVAILABLE TO ORDER**
You can now order these hard-to-find arms directly from us at a ground-breaking price, from £69.90 per arm - GROUP BUY - 75/ZT Rear Upper Arms

To order at these prices, you need to use the link above and complete your purchase. Once they're here, any remaining arms will be sold at the normal (£119.99 per arm) price.

Pricing:
Single Arm (LH or RH) - £79.99 including P+P
Pair of Arms (LH and RH) - £154.99 including P+P (£77.49 each)
2x Pairs of Arms (2x LH and 2x RH) - £299.99 including P+P (£74.99 each)
5x Pairs of Arms (5x LH and 5x RH) - £699.99 including P+P (£69.90 each)

Right guys, I thought I'd take this to the Club as soon as I found out the news below.
The Rear Upper Suspension Arms RGG104962 and RGG104972 are in danger of becoming NLA again, as my supplier can no longer find them from MG, and must order them directly from their manufacturer in China. Their minimum order quantity is quite large, 250 pairs - so I can still find them, but need to place a very large order.

I'm not expecting to have all 250 pairs ordered, however I've arranged a Group Buy so we can get the ball rolling. The link is at the bottom of this post.

The price as part of the Group Buy would be a lot lower than the £119.99 I currently sell each side for, but the arrival time will be 2-3 months from now (just after New Year) if previous sales rates are anything to go by.

Of course in future years these items will be well sought after, so it may be worth ordering a few sets to sell in future, keep in the garage for your 75 or ZT, or to help keep other member's cars on the road in future.

If you're interested in a set, please order from the link at the top of this post..

These are the arms in question:



(Image taken from Google, it's not one of mine).

Here's the arm itself, off the car:

[Arctic]

(Image taken from Google, it's not one of mine).

It is one of mine you can just about make out the copyright Arctic© in the bottom right hand corner all my photo's carry this from now on.



A close up of the arm

[David Lawrence]

Originally Posted by Arctic

(Image taken from Google, it's not one of mine).

It is one of mine you can just about make out the copyright Arctic© in the bottom right hand corner all my photo's carry this from now on.

Hmm, your caliper has the same kind of finish on it that your new fbh pump has. Are you using varnish?

What is the latest on stocks and deliveries and prices for these arms?

[DMGRS]

Current pricing here David:
Rear Upper Arms -- 75/ZT

Of course they're eligible for Club discount.

[DMGRS]

Originally Posted by Arctic

(Image taken from Google, it's not one of mine).

It is one of mine you can just about make out the copyright Arctic© in the bottom right hand corner all my photo's carry this from now on.

I can remove them if you like - didn't realise they were yours. I just needed a picture to illustrate the part on the car.
My apologies.

[andymc]

I finally need to fit the pair of these I bought nearly three years ago. The mechanic asked if they came with "cam bolts" for fitting them, but they don't appear to have. Do you stock these Mat? If not, where can they be acquired?

EDIT never mind, found them on your site.

[clf]

Originally Posted by andymc

I finally need to fit the pair of these I bought nearly three years ago. The mechanic asked if they came with "cam bolts" for fitting them, but they don't appear to have. Do you stock these Mat? If not, where can they be acquired?

I guess he thinks that they adjust the camber? They just bolt in, look on Rimmer's site for what you need. I ordered all new but I got them from Rimmer's as mat didn't have all that I needed. (For other areas). I believe he has the bolts required though listed in the drop down for the arms.

When I removed mine, I kicked myself, as looking at them, they looked to be perfectly serviceable, but I did replace all since I had bought all new.

Sent from my SM-A310F using Tapatalk

[andymc]

Only a few quid for new ones, so I ordered them anyway - I suppose if the old ones have to be cut to remove the arms, I won't be stuck waiting for the replacements.