Inner Tie Rod (replacement parts)

Sheraton · 13th February 2020, 10:30

How'do folks

I'm hoping to get my MOT advisories ticked off my list.

Inner Tie Rods - has anyone changed these ? what parts are we using ? and where to purchase some ?

Are Mg/Rover Parts available ?

I don't fancy "HD, OEM Quality" unbranded replacements

Paul.

macafee2 · 13th February 2020, 13:07

is this any use
https://www.the75andztclub.co.uk/for...d.php?p=774474

macafee2

Captain Crappycrimp · 13th February 2020, 13:47

I found various sets on eBay but purchased a set of QH ones which seem to be working well for the last year

trikey · 13th February 2020, 15:00

I use VW sharan ones, the inner thread needs cutting down a few mm to allow them to fit, but for half the price of the other rover ones out there it’s worth doing.

Sent from my iPhone using Tapatalk

Mickyboy · 13th February 2020, 15:15

Quote:

Originally Posted by Captain Crappycrimp

I found various sets on eBay but purchased a set of QH ones which seem to be working well for the last year

I’ve fitted QH ones on my cars and a few customers cars and they seem to last fairly well
Mick

Sheraton · 1st March 2020, 21:57

I managed to get these parts ordered/delivered

I opted for Moog parts - same as my recently fitted Front Control Arms

I'm satisfied these Moog Parts are of Good Quality

Vw Sharan/Ford Galaxy/Seat Alhambra..... stick them where you like it seems

- Inner Tie Rods - Paired with Rover 75/MG ZT Track Rod Ends.

the Inner Tie Rods measure 17mm (or just shy) on the inboard thread going by my Rule - i'll wait until i've removed/measured the original parts before i make any adjustments here

I have a tool for removing the Original Inner Tie Rods.....we'll find out if it's any Good - and i'll threadlock the new parts when fitting (inboard thread)

Paul.

Royster · 31st January 2021, 08:18

Good morning

would you have references and suppliers for the Moog and HQ inner tie rods please

Royster

Odd Job · 31st January 2021, 08:33

Moog don't do them,
the one's on eBay are the VW Sharan / Seat Alambra / Ford Galaxy ( all the same vehicle obviously under which ever badge they wear ) which have been machined down.
If done properly I cant see the problem with doing this as it's only a couple of mm of the length on the thread going into the rack.

DMGRS · 31st January 2021, 23:54

We've got some that are the correct length - and they last fantastically well.
A 5 year no-quibble warranty is included, and they're in UK stock and ready to go.

https://www.dmgrs.co.uk/products/rov...-steering-rack

bl52krz · 2nd February 2021, 21:38

Mine are last well that I got from DMGRS a couple or so years ago. That’s because I have not fitted them yet. Only got them as a standby. If Scott or Matt read this I will let you know when I fit them, and count the 5 years warranty from when I fit them. Is that ok Scott/Matt.? Lol

13th February 2020, 10:30	#1
Sheraton Posted a thing or two Rover 75 1.8t Join Date: Oct 2015 Location: Edinburgh Posts: 1,377 Thanks: 384 Thanked 409 Times in 267 Posts	Inner Tie Rod (replacement parts) How'do folks I'm hoping to get my MOT advisories ticked off my list. Inner Tie Rods - has anyone changed these ? what parts are we using ? and where to purchase some ? Are Mg/Rover Parts available ? I don't fancy "HD, OEM Quality" unbranded replacements Paul.

13th February 2020, 13:47	#3
Captain Crappycrimp Gets stuck in Devil car is dead! Join Date: Oct 2011 Location: Scarborough Posts: 774 Thanks: 94 Thanked 145 Times in 92 Posts	I found various sets on eBay but purchased a set of QH ones which seem to be working well for the last year __________________ SAVED SO FAR 2003 Le mans Green MG ZTT 1.8T, 2003 MG ZT CDTI BRG, ZT 190 Typhoon, 2001 Rover 75 1.8 Tourer , 2002 solar red MG ZTT 177, 2005 Silver MG ZTT CDTI, 2001 Trophy Blue MG ZT (Early No 131) 160, 2004 XPG MG ZT CDTI. 2004 MG ZT Ignition Blue MG Press car/Pheonix 4 personal car. Rover 75 CDT top spec Cowley car. 2003 MG ZT 190+ white Gold. Couldn't save MG ZT 1.8T XPG 2005 MG ZTT Goodwood Green(Devil car) MY PROJECT 2004 MG ZTT Diesel auto in disappointing grey.

13th February 2020, 15:00	#4
trikey Premium Trader Rover 75 Join Date: Nov 2010 Location: Devon Posts: 33,777 Thanks: 8,837 Thanked 14,831 Times in 8,030 Posts	Inner Tie Rod (replacement parts) I use VW sharan ones, the inner thread needs cutting down a few mm to allow them to fit, but for half the price of the other rover ones out there it’s worth doing. Sent from my iPhone using Tapatalk __________________ Lest we forget..

31st January 2021, 08:18	#7
Royster Regular poster MG ZT Join Date: Aug 2010 Location: Maidstone Posts: 89 Thanks: 8 Thanked 17 Times in 9 Posts	Inner Tie Rods Good morning would you have references and suppliers for the Moog and HQ inner tie rods please Royster

31st January 2021, 08:33	#8
Odd Job Gets stuck in MG ZT 2.0 cdti Join Date: Aug 2019 Location: Derby Posts: 909 Thanks: 298 Thanked 191 Times in 149 Posts	Moog don't do them, the one's on eBay are the VW Sharan / Seat Alambra / Ford Galaxy ( all the same vehicle obviously under which ever badge they wear ) which have been machined down. If done properly I cant see the problem with doing this as it's only a couple of mm of the length on the thread going into the rack. __________________ ….And the latest thing to break is..... ### MG STANDS FOR "MY GREMLIN" !!!

13th February 2020, 13:07	#2
macafee2 This is my second home Rover 75 Saloon & Tourer Join Date: Sep 2012 Location: Lincoln Posts: 14,932 Thanks: 1,630 Thanked 3,032 Times in 2,181 Posts	is this any use https://www.the75andztclub.co.uk/for...d.php?p=774474 macafee2

1st March 2020, 21:57	#6
Sheraton Posted a thing or two Rover 75 1.8t Join Date: Oct 2015 Location: Edinburgh Posts: 1,377 Thanks: 384 Thanked 409 Times in 267 Posts	I managed to get these parts ordered/delivered I opted for Moog parts - same as my recently fitted Front Control Arms I'm satisfied these Moog Parts are of Good Quality Vw Sharan/Ford Galaxy/Seat Alhambra..... stick them where you like it seems - Inner Tie Rods - Paired with Rover 75/MG ZT Track Rod Ends. the Inner Tie Rods measure 17mm (or just shy) on the inboard thread going by my Rule - i'll wait until i've removed/measured the original parts before i make any adjustments here I have a tool for removing the Original Inner Tie Rods.....we'll find out if it's any Good - and i'll threadlock the new parts when fitting (inboard thread) Paul.

31st January 2021, 23:54	#9
DMGRS Discount MG Rover Spares Rover 75 CDTi, 2x MG ZS180 Join Date: Jun 2011 Location: Hythe, Southampton Posts: 11,320 Thanks: 456 Thanked 3,377 Times in 2,027 Posts	We've got some that are the correct length - and they last fantastically well. A 5 year no-quibble warranty is included, and they're in UK stock and ready to go. https://www.dmgrs.co.uk/products/rov...-steering-rack __________________ Your trusted MG Rover specialist! Tel: 02380 001133 / Email: [email protected] We now have a 'chat' function on our site for even quicker replies. Give it a try! Remember - discount code FORUM5 for 5% off

2nd February 2021, 21:38	#10
bl52krz This is my second home Rover 75 cdt club + Rover 2.5 KV6 Conni SE Join Date: May 2008 Location: Birmingham Posts: 11,396 Thanks: 6,587 Thanked 2,262 Times in 1,729 Posts	Mine are last well that I got from DMGRS a couple or so years ago. That’s because I have not fitted them yet. Only got them as a standby. If Scott or Matt read this I will let you know when I fit them, and count the 5 years warranty from when I fit them. Is that ok Scott/Matt.? Lol __________________ Great Barr, Birmingham.