Rear ABS sensor: clarity needed after wheel rotation test

[goltho]

Originally Posted by macafee2

Dougie, if you do replace the bearing I'd like to take a look at the old one and what part has failed.

Sure, no probs. I'll hang on to it.

Originally Posted by xsport

you may be better buying a new sensor whilst your at it. you may well get away with cleaning the sensor face if your lucky. if not , the odds are stacked against removing the old one without damage. dmgrs does do them,at least they are guaranteed to work and last,unlike some cheapo ebay sensors. actually , when you look at his price for hub and sensor for the rear .. its not too bad at all . i fitted 2 new rears and sensors recently on mine and the bearings are good quality. anyway .. good luck !!

Just posted my last reply above and saw you'd commented about the same thing! I'm happy to have got a great deal with GSF for the hub and also with DMGRS for the sensor. I had initially thought it would cost me the best part of £100 for the parts which is (mainly) why I asked for advice here to narrow it down. Also though, I get a kick out of learning stuff. I can't stand just changing out parts to see if it cures the problem! Nothing usually gets learned apart from the cost of parts!

Dougie.