|
||
|
22nd July 2015, 00:34 | #1 |
Owners Club Director
Rover 75 V6 Copperleaf Red, MG ZTT 190+ Lagoon & Early MGF Join Date: Oct 2006
Location: Rugby
Posts: 9,287
Thanks: 105
Thanked 343 Times in 81 Posts
|
Wiring in electric seats (non memory)
Hi all
I'm getting confused with the many threads on this subject, and a how to (with no pictures ) I am trying to wire in the electric motors only of the driver & passenger seats (non memory) and trying to figure out the wiring - the advice seems to be conflicting. I have a switched live and a ground. The live I split into two fused lives - one for each seat. So far I have tried wiring the passenger seat in (as in here) but I wired a +12V and Gnd but got no joy - I now read (here) that there are two lives - is this correct? If so - which ones (what colour wires)? (no photos in the original post). If I can get the passenger seat working I can then tackle the drivers' side. I do have power arriving at the seat, no blown fuses, just no movement. Any ideas please? Thanks!
__________________
Christopher in banana veritas |
22nd July 2015, 00:57 | #2 |
This is my second home
None * DROWNED Join Date: Aug 2007
Location: Cardigan
Posts: 33,339
Thanks: 1,257
Thanked 1,664 Times in 1,081 Posts
|
Give me (via PM) the links that are missing the pics and I will see if I have them saved on my PC And therefore can reinstate them I cannot keep an eye on all threads that are relevent. I do my best but I do need the help from the members who note the missing contents
__________________
Andrew Ich Dien Problem solving is... lateral thinking SEARCH FIRST ...ASK LATER... Last edited by Dragrad; 22nd July 2015 at 01:00.. |
22nd July 2015, 21:59 | #3 |
Owners Club Director
Rover 75 V6 Copperleaf Red, MG ZTT 190+ Lagoon & Early MGF Join Date: Oct 2006
Location: Rugby
Posts: 9,287
Thanks: 105
Thanked 343 Times in 81 Posts
|
Answering my own question - it would seem that if you have the "older"(?) seats (with the yellow relay on the base) you need to supply a switched 12V supply to BOTH the orange/white and orange/green wires and then GND the Black wire. This goes for both the passenger and drivers' seats (non-memory seats) - did this and it work a treat!
Now I just need to find out, in the attached picture (not mine, taken from here) - which fuse corresponds to the switched live feed on the left most of the AUX connections? I have two inline 30Amp fuses for the seats but I guess there is a fuse in the fuse box somewhere as it went when I loaded the motors with the seat at its full reach ... Thanks for any pointers.
__________________
Christopher in banana veritas |
23rd July 2015, 00:59 | #4 | ||
Been round the block
75 Tourer Join Date: Apr 2009
Location: Cannock
Posts: 4,125
Thanks: 3
Thanked 189 Times in 121 Posts
|
Quote:
Quote:
------------------- Chris, if you have used the Aux terminal/s to supply the seats as in the pic you posted, the left AUX terminal is fuse twelve (7th left from bottom right yellow airbag fuse) You need to replace the blown 10A with a 15A if nothing else is plugged into it., otherwise the 10A will keep blowing.you need to change your inline fuses to 15A also 30A is ok but is the reason why the 10A in fuse 12 blew), although inline fuses are not needed if you have connected to the fused AUX supply. UNLESS you have put the inline fuses where they are easily accessible, then put a 30A in fuse 12, then the 15A inline fuses will blow before the 30A in fuse 12. Am I right in guessing your inline fuses are 3" from the fusebox When you connect up the heated seats. If you are using the same AUX supply as the motors for the heated seats, you will need to uprate fuse 12 to 20A and your inline fuses to 20A (20A will still blow ok in the event of a motor short or overload) Seats without the yellow relay are ok to power from permanent 12v, the yellow relay on older seats draw a constant current, and should be connected to AUX I have no idea why Commanche used a relay for a aux socket from a fused AUX supply, a fused one at that. It is doing nothing at all, what is it switching
__________________
If at first you don't succeed, hide the evidence Last edited by Devilish; 23rd July 2015 at 01:54.. |
||
23rd July 2015, 08:16 | #5 |
Owners Club Director
Rover 75 V6 Copperleaf Red, MG ZTT 190+ Lagoon & Early MGF Join Date: Oct 2006
Location: Rugby
Posts: 9,287
Thanks: 105
Thanked 343 Times in 81 Posts
|
Wiring in electric seats (non memory)
Hi I did see it but all the info points to one of the cables you need to power as heated seat - which I wanted to keep well away of.
Re fuses thanks for pointing out the fuse I need yes I have inline fuses simply as I had a fragment of a loom with them on. Will put the fuses as you suggest though. This setup is temporary just so I can move the seats to get the cloth ones out to give away this weekend! After that will wire the seat motors and heaters more properly trying to go the oem route ... Thanks for all the info!!
__________________
Christopher in banana veritas |
|
|