loom part number-help!

tapped · 16th November 2007, 16:22

Hi all

Just bought the upgrade kit off ebay with the symphony and matching cd chnager. Perfect kit and a bargain but its going into a ZTV8 and its just hit me that half the glovebox on this is taken up by the ventilation system!

Anyone know the loom part number to run the unit to a boot mounted 'changer?

No big deal if I can't do it as I'm 95% set on buying a 75 to go with the ZT anyway :-)))))

Simon · 16th November 2007, 17:31

You don't actually need to buy a new loom - just extend the exisiting wires in the loom you already have

I believe a few members have done this themselves - frees up the glovebox for other items and moves the CD changer into the boot to reduce noise from it too.

Greeners · 16th November 2007, 18:10

Yep done that....the genuine loom is no longer available, If you want it in the boot then you need to take your existing loom and slice an extra 5m of cable in between. There is a how to....somewhere I wrote up when I did mine.

JohnDotCom · 16th November 2007, 18:17

Did you mean one of these David?
Quite handy to have for those people wanting to fit Sat Nav at some time.

http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEWA:IT&ih=017

Just seen you didn't mean this, Sorry. Brain elsewhere.

16th November 2007, 16:22	#1
tapped Gets stuck in Ex-75 1.8T, 2.5V6 and CDT + ZT 190 & V8! Join Date: Feb 2007 Location: Warwick Posts: 626 Thanks: 3 Thanked 0 Times in 0 Posts	loom part number-help! Hi all Just bought the upgrade kit off ebay with the symphony and matching cd chnager. Perfect kit and a bargain but its going into a ZTV8 and its just hit me that half the glovebox on this is taken up by the ventilation system! Anyone know the loom part number to run the unit to a boot mounted 'changer? No big deal if I can't do it as I'm 95% set on buying a 75 to go with the ZT anyway :-)))))

16th November 2007, 18:10	#3
Greeners Moderator MG-ZTT Join Date: Mar 2007 Location: Ware, Herts Posts: 19,798 Thanks: 161 Thanked 1,249 Times in 1,036 Posts	Yep done that....the genuine loom is no longer available, If you want it in the boot then you need to take your existing loom and slice an extra 5m of cable in between. There is a how to....somewhere I wrote up when I did mine. __________________ *David* Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics]

16th November 2007, 17:31	#2
Simon Banned - Join Date: Nov 2006 Location: - Posts: 10,318 Thanks: 0 Thanked 4 Times in 3 Posts	You don't actually need to buy a new loom - just extend the exisiting wires in the loom you already have I believe a few members have done this themselves - frees up the glovebox for other items and moves the CD changer into the boot to reduce noise from it too.

16th November 2007, 18:17	#4
JohnDotCom * Rover 75 FaceLift Tourer CDTi 170BHP Auto ConnSE 2005 Model Starlight Silver Join Date: Nov 2006 Location: Abergele Posts: 28,735 Thanks: 0 Thanked 6 Times in 5 Posts	Did you mean one of these David? Quite handy to have for those people wanting to fit Sat Nav at some time. http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEWA:IT&ih=017 Just seen you didn't mean this, Sorry. Brain elsewhere.