|
||
|
10th July 2019, 09:44 | #1 |
Gets stuck in
75 Tourer CDT MK2 manual in Glorious Grey Join Date: Jan 2018
Location: Slovakia
Posts: 987
Thanks: 926
Thanked 346 Times in 252 Posts
|
Can anyone identify things in these pictures?
Hi folks,
When I had a good look through the car I found a bunch of stuff - some of it brand new parts, some maybe good used replacements and others that may be U/S parts that were replaced already. I will attach some pictures if some folks could hazard a few guesses. So far I have identified new front and rear brake pads, a brake pad wear sensor, bonnet release cable assembly, sunroof switch ( I don't have a sunroof), a used switch with a spring loaded probe (but for what?), a couple of floor mat retainers, 4 new brushes (starter or alternator?), an intake gasket or two, a couple of metal exhaust gaskets (downpipe gaskets may be from the DPF installation), a variety of o-rings, a home made pipe adapter with a fine thread on one side and coarse thread on the other, a transparent plastic internally threaded cap, a black 8 spoke plastic wheel (92mm outside diameter x 16mm wide), a new long bolt (15mm x 85mm fine thread - for where?), another long bolt (used - 6mm x 90mm) and various other bolts and clips.
__________________
Southern Slovakia Anything can happen in Formula 1 and usually does - Murray Walker 1999 Triumph Trophy 900, Saddlesore 1600, Iron Butt Riders Association #63720 2005 Rover 75 CDT Tourer MK2 |
|
|