Rotary Coupler (Clock Spring)

[daveo138]

Originally Posted by Popcorn

Sure I've read on here that the ir is MG specific , but not 100'/.

Ooerrr. Can anyone confirm?

[suzublu]

Originally Posted by daveo138

Ooerrr. Can anyone confirm?

I think Sean is right, MG specific 🤔

Sent from my SM-A145R using Tapatalk

[daveo138]

Thanks all.

[Lee T]

I though it was dependant on the radio that was fitted.
Easy check, just pop out the plastic piece under the eyebrow and look for the IR. If you had the console out it could be the IR was overlooked and is hanging behind the console.

Lee.

[daveo138]

Originally Posted by Lee T

I though it was dependant on the radio that was fitted.
Easy check, just pop out the plastic piece under the eyebrow and look for the IR. If you had the console out it could be the IR was overlooked and is hanging behind the console.

Lee.

It could be.

Having said that, I don’t actually know what it looks like. Does anyone have a photo?

[Lee T]

Don't have a picture, but I'd describe it as an oblong led. Roughly 10mm long and 5mm wide. If it's there, removing the stereo and having a look at the radio loom with a torch should reveal it.

Lee.

[daveo138]

Originally Posted by Lee T

Don't have a picture, but I'd describe it as an oblong led. Roughly 10mm long and 5mm wide. If it's there, removing the stereo and having a look at the radio loom with a torch should reveal it.

Lee.

Thanks, I'll have a look.